Adding wire numbers

Wire numbers are blocks or attributes inserted on a line wire entity. AutoCAD^® Electrical assigns each wire number type to its own layer. You can assign a different color to each of these layers so you can easily tell them apart. The wire number placement is set to in-line as defined on the Drawing Properties Wire Numbers dialog box.

Insert wire numbers

1. Click Schematic tab Insert Wires/Wire Numbers panel Insert Wire Numbers drop-down Wire Numbers.
2. On the Wire Tagging dialog box, specify:

    

   Wire Tag Mode:

   Sequential

    

   Start:

   100
3. Click Drawing-Wide.

   The wire numbers are automatically inserted into the drawing starting with number 100.

4. Click Schematic tab Edit Wires/Wire Numbers panel Move Wire Number.
5. Respond to the prompts as follows:

    

   Specify new Wire Number location (select on wire):

   Select each wire closest to Black Box 1, right-click

   Note: You can align the wire numbers using the Align tool.