- 360 Publisher
- Alias
- AutoCAD
- AutoCAD Civil 3D
- AutoCAD Electrical
- AutoCAD for Mac
- AutoCAD LT for Mac
- AutoCAD Map 3D
- BIM 360 Glue
- Building Design Suite
- Constructware
- Creative Finishing
- Design Review
- Factory Design Suite
- Flame Premium
- Green Building Studio
- Infr. Map Server
- Infrastructure Modeler
- Installation Help
- Inventor
- Inventor ETO
- Inventor Fusion
- Inventor Fusion Technology for Mac
- Inventor LT
- Inventor Publisher
- Navisworks
- Navisworks Freedom
- PLM 360
- Product Design Suite
- Project Galileo
- Project Photofly
- Project Simulus
- Revit
- Revit LT
- Robot Structural Analysis Professional
- Sim 360 Pro and Sim 360 Moldflow
- Simulation 360
- Simulation CFD
- Simulation DFM
- Simulation Job Manager
- Simulation Mechanical
- Simulation Moldflow
- Simulation Moldflow Adviser
- Simulation Moldflow Communicator
- Simulation Moldflow Insight
- Simulation Moldflow Insight 360
- Smoke
- Vasari
- Vault
Table of contents
AutoCAD Electrical provides utilities to make it easy to resequence the terminal numbers across one or many drawings. These utilities do not resequence terminals that carry a wire number as the terminal number.
Terminal Renumber (Project-Wide)
- Enter AETERMRENUM at the command prompt.
The Project-wide Schematic Terminal Resequence dialog box displays.
- Enter the terminal strip tag ID and the starting terminal number.
- If you want to refine the search, enter an installation or location code to use when searching the drawings.
Click Project or Drawing to select an installation or location code from existing terminal numbers.
- Click OK.
- In the Select Drawings to Process dialog box, select the drawings to search through, and click OK.
Project-wide schematic terminal renumber
Resequences the terminal numbers across one or many drawings.
Command entry: AETERMRENUMTag-ID | Specifies the terminal strip ID to use when searching each drawing for terminals. Only terminals with this ID are updated. |
Include Installation/Location in terminal strip Tag-ID match | Updates a terminal only if it matches the Terminal Strip ID, Location, and Installation values specified. |
Installation code | Refines the search by including an installation value. |
Location code | Refines the search by including a location value. |
Starting terminal number | Specifies the number to begin the terminal strip with; you can use alphanumeric values. The default value is 1. |
After you click OK, select the drawings to process from the active project.