Use Recursive Ops to perform a wide range of recursive, animation-based blending effects.
You can access the Recursive Ops Effect in the following ways:
- As a Batch node.
- From the EditDesk. Select Flame FX2 from the A/V Tools box and then click Recursive Ops.
Recursive Ops uses the processed result of the previous frame and blends it with the current frame using a selected blending mode. It features a built-in colour selection, which will constrain the accumulation effect within that selection. Additionally, it accepts an external matte input which will also condition the way in which the internal blending occurs.
Repeat Mode Settings
- Repeat Mode options box
Select an option to fill the empty portions of the frame.
Range Settings
- Range from field
This field displays the beginning of the range of frames that will be impacted by the accumulation effect.
- Range to field
This field displays the beginning and end of the range of frames that will be impacted by the accumulation effect.
- Range before button
Select between bypass and cycle. Bypass eliminates the recursive ops effect. Cycle repeats the accumulation effect. This is applied before the set frame range.
- Range after button
Select between bypass and cycle. Bypass eliminates the accumulation effect. Cycle repeats the recursive ops effect. Applied after the set frame range.
Effects Settings
- Effects crumple distortion button
Enable this button to active the crumple effect.
- Effects amplitude field
This field displays the amount of distortion. Increase the value to increase the effect.
- Effects octave field
This field displays the number of layers summed in the operation, from 0 to 10. Increase the value to increase the fractal effect.
- Effects blur button
Enable this button to active the blur effect.
- Effects amount field
This field displays the amount of blur applied to the image.
2D Transform Settings
- 2D Transform active button
Enable this button to activate the 2D transform effect.
- 2D Transform show icons button
Enable this button to display the vertex editing tools in the image window.
- 2D Transform position X field
This field displays the horizontal position of the transformation.
- 2D Transform position Y field
This field displays the vertical position of the transformation.
- 2D Transform centre X field
This field displays the centre point value of the transformation along the horizontal axis.
- 2D Transform centre Y field
This field displays the centre point value of the transformation along the vertical axis.
- 2D Transform scale X field
This field displays the horizontal scale factor.
- 2D Transform scale Y field
This field displays the vertical scale factor.
- 2D Transform proportional button
Enable this button to scale X and Y values proportionally.
- 2D Transform rotation field
This field displays the rotation of the transformation.
Colour Correction Settings
- Colour Correction Active button
Enable this button to activate the color correction effect.
- Colour Correction clamp options box
Select a clamping option.
- Colour Correction saturation field
This field displays the level of color purity in the image.
- Colour Correction gamma field
This field displays the gamma level.
- Colour Correction offset field
This field displays a value that modifies all of the colour parameters.
- Colour Correction gain red field
This field displays the amount of color values in the red channel.
- Colour Correction gain green field
This field displays the amount of color values in the green channel.
- Colour Correction gain blue field
This field displays the amount of color values in the blue channel.
- Colour Correction gain luminescence field
This field displays the amount of luminance value.
- Colour Correction proportional button
Enable this button to adjust the gain of the color values proportionally.
Blending Settings
- Blending options box
Select a logical operation that can be used to blend the front clip and the result clip.
- Blending transparency field
This field displays the percentage of blending when the result is composited on the front clip.
- Blending use matte button
Enable this button to apply the blur with the areas defined by the matte.
Rendering Settings
- Rendering clamp options box
Select a rendering option for color and luminance values in the 16-bit floating point processing pipeline.
Matte Output Settings
- Matte Output options box
Select input, invert or selective. Choose selective to select the color you wish to keep.
