Select whether to render in Progressive or Interlaced mode.
Regen button
Enable to get dynamic updating of the image as you make changes.
Edges Settings
Edges button
Enable to create an image composed of the edges in an image.
Matte Edge Mode box
Select whether to use the Basic, Advanced or Smooth edge-detection algorithm. Certain settings change based on this selection.
Basic Settings
Width field
Displays the value that affects how the edge-detection algorithm determines whether each pixel forms part of the edge. Editable.
Minimum Input field
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
Maximum Input field
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
Advanced Settings
Minimum Input field
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
Maximum Input field
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
Inner Width field
Displays the width of the inner edges of the matte. Editable.
Outer Width field
Displays the width of the outer edges of the matte. Editable.
Width Proportional button
Enable to affect the inner and outer width proportionally.
Inner Softness field
Displays the level of softness on the inner edges of the matte. Editable.
Outer Softness field
Displays the level of softness on the outer edges of the matte. Editable.
Softness Proportional button
Enable to affect the inner and outer softness proportionally.
Smooth Settings
Smooth Minimum field
Enter a lower limit for the edge detection. Editable.
Smooth Maximum field
Enter the upper limit for the edge detection. Editable.
Smooth Softness field
Enter a value for softness of the edge. Editable.
Smooth Gain field
Enter a value for the softness gain of the edge. Editable.
Shrink Settings
Shrink button
Enable to remove pixels from the edge of the matte.
Shrink Mode box
Select whether to use shrink in a single pass or iterative mode. Single Pass mode allows you to control edge softness.
Shrink Width field
Displays the width of the border that is removed from the edge of the matte. Editable.
Softness field
Displays the amount of softness applied to the edges of the matte.
Minimum Input field
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
Maximum Input field
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
Erode Settings
Erode button
Enable to blend the light and dark edges of the matte.
Erode Width field
Displays the width of the matte border to soften. Editable.
Blur Settings
Blur button
Enable to apply a softening Gaussian blur filter to the edge of the matte.
Blur Width field
Displays the width of the blur applied to the edge of the matte. Editable.
Blur Height field
Displays the height of the blur applied to the edge of the matte. Editable.
Proportional button
Enable to constrain blur amount proportions.
Matte Luminance Curve Settings
Matte Luminance Curve
Controls the blending of the edges.You can add keyframes to the curve using Add mode, move keyframes with Move mode, and modify the curve's shape using tangent handles.
Reset box
Resets the curve view.
Home button
Reverts to the original view.
Noise Settings
Noise button
Enable to add noise to the transparent areas of the matte.
Noise Mode box
Select the mode of noise to apply throughout the length of the image. Static adds noise as a still frame; Impulse adds noise that changes at each frame.
Select:
To add noise:
Static
As a still frame. You can move the static noise using the Position X and Y fields.
Impulse
Changing at each frame, but always starting from the same seed.
Weight field
Displays the level of noise in the clip. Values below 1 add more white noise, and values above 1 add black noise. Editable.
Softness field
Displays the level of Gaussian softness added to the noise. Editable.
Position X field
Displays the X position of the noise when using Static mode. Editable.
Position Y field
Displays the Y position of the noise when using Static mode. Editable.
Size X field
Displays the size of the noise along the X axis. Editable.
Size Y field
Displays the size of the noise along the Y axis. Editable.
Proportional button
Enable to affect the X and Y sizes proportionally.
