When you are playing back audio with your video, you need to make sure your playback settings correspond to your audio configuration. Typically, each track is played through a corresponding port (e.g., track 1 passes through port 1, track 2 passes through port 2, etc.), but your system might be configured to have multiple tracks going through a single port (e.g., tracks 1, 3, and 5 pass through port 1). The Monitoring option allows you to set how the tracks are played back.

NoteIf you disable any audio tracks in the Playout menu, it will not be heard during playback.

To select a monitoring option, click the Monitoring option box to select the monitoring option you want.

Select:	Audio Device:	When:
Stereo Downmix	DVS or AJA	There are only two audio tracks that are supported on the audio monitoring device. All the odd numbered tracks (e.g., 1, 3, 5, etc.) go through port 1 and all the even numbered tracks go through port 2.
4-Track Downmix	DVS or AJA	There are only four audio tracks that are supported on the audio monitoring device.
8 Tracks	DVS only	There are up to eight tracks and each track is supported on the audio monitoring device.
8-Track Downmix	AJA only	There are only eight tracks that are supported on the audio monitoring device.
16 Tracks	AJA only	There are up to 16 tracks and each track is supported on the audio monitoring device.

NoteThe audio monitoring option can also be set within the Engineering settings tab of the project configuration settings. See Engineering Settings.

Flame Premium

Community Scoring

Tag Tags0

Page statistics

Audio Monitoring Options

Table of contents

Comments0