Product help with community knowledge
Anniversary Edition
Flame Premium
HomeFlame PremiumEnglishAnniversary EditionHelpRelease NotesAutodesk Flame Premium 2013 20th Anniversary Edition Release Notes

Community Scoring

Was this page helpful?

Tag Tags0

This page has no tags

Page statistics

5042 views,  15 edit(s),  73850 characters(s) Page last modified 08:19, 19 Apr 2013 by cornellier
How to add your knowledge

Autodesk Flame Premium 2013 20th Anniversary Edition Release Notes

    • Autodesk Flame ® Premium 2013 20th Anniversary Edition
    • Autodesk Flame 2013 20th Anniversary Edition
    • Autodesk Flare ™ 2013 Extension 1
    • Autodesk Smoke® Advanced 2013 Extension 1
    • Autodesk Flame Premium Grading - Lustre ® 2013 Extension 1
    • Autodesk Inferno ® 2013 Extension 1
    • Autodesk Flint ® 2013 Extension 1
    • Autodesk Backdraft ® Conform 2013 Extension 1

    Information for this release:

    Install and Learn

    The Flame and Flame Premium 2013 20th Anniversary Editions feature a major redesign of the workflow, integrating the powerful visual effects toolset of Flame 2013 with the full set of story-driven editorial tools of Smoke Advanced 2013. The Extension 1 releases also offer a new workflow.

    Continue to use your 2013 release (shipped in April 2012) in production, and make the switch to the 20th Anniversary Edition workflow when you are ready. Autodesk highly recommends familiarizing yourself with the new workflow in the 20th Anniversary Edition and/or Extension 1 release before use in production.

    While it is preferable to install and learn the new software on a separate workstation, Flame Premium 2013 20th Anniversary Edition and Extension 1 software can be installed on the same workstation as the 2013 release. However there are some considerations.

    Two important components of the software package are replaced when you install the latest version: Wiretap Gateway and Stone & Wire.

    This means that after installing 2013 20th Anniversary Edition/Extension 1, your 2013 version will use those new components with their new functionality, but with the following known issues and limitations.

    Volume Integrity Check (VIC) No Longer Runs Automatically

    VIC will not run automatically if there is a 2013 20th Anniversary/Extension 1 project on your framestore.

    VIC must run daily to prevent data loss.

    If you install 2013 20th Anniversary/Extension 1 on the same workstation as your 2013 software, you must run VIC manually to check the integrity of media files used by your projects.

    To run VIC manually, type the following command in a shell:

    /usr/discreet/io/bin/vic -a

    Be sure to read the results from the command in the shell to be sure that VIC ran successfully.

    To run VIC, you can also open a project in 2013 20th Anniversary Edition/Extension 1 or reboot your system.

    Wiretap Server Compatibility

    When both 2013 20th Anniversary Edition/Extension 1 and 2013 are installed on the same system, two versions of Wiretap Server are also installed. You must make sure that the version of Wiretap Server running is compatible with your version of the creative application. This is particularly important when working on interop projects that rely on Wiretap Server, such as working on a grading project using both Smoke and Lustre.

    To confirm or change versions of Wiretap Server:

    1. In a shell, go to /usr/discreet/<flamepremium_version>/bin.
    2. As root, run ./selectWiretapVersion.py. This script will tell you which version of Wiretap Server is currently running.
    3. Type the number next to the version you wish to run.
    4. Restart the Wiretap server. Type: sw_restart

    System Requirements

    System Requirements for Linux Workstations

    NoteThese hardware requirements do not apply to Autodesk Flare or Autodesk Smoke for Mac OS X.

    The following tables list the hardware platforms supported in this release, including Linux stand-alone workstations, Incinerator workstations and Lustre Media Servers.

    Workstation BIOS AJA Firmware Operating System DKU
    HP® Z820 Workstation with NVIDIA® Quadro 6000 graphics card 1.14 AJA KONA 3G: 2011/12/02 13:05:45 Red Hat® Enterprise Linux® Workstation 6.2 (64-bit) 7.5.0
    HP Z800 Workstation with NVIDIA Quadro 6000 graphics card 3.54 AJA KONA 3G: 2011/12/02 13:05:45 Red Hat Enterprise Linux Desktop 5.3 with Workstation Option (64-bit) 7.5.0
    HP Z800 Workstation with NVIDIA Quadro FX5800 3.54 0x75 AJA OEM 2K Red Hat Enterprise Linux Desktop 5.3 with Workstation Option (64-bit) 7.5.0
    HP xw8600 1.35 0x73 Red Hat Enterprise Linux WS 4, Update 3 (64- bit) 7.5.0
    HP xw9400 3.05 0x73 Red Hat Enterprise Linux WS 4, Update 3 (64- bit) 7.5.0
    HP xw 8400 2.26 0x73 Red Hat Enterprise Linux WS 4, Update 3 (64- bit) 7.5.0

    System Requirements for Lustre on Microsoft® Windows®

    The following table lists the Lustre Windows workstations supported in this release, as well as the certified BIOS version, NVIDIA graphics card driver version and operating system version for each platform.

    Workstation BIOS Graphics Driver Operating System
    HP xw8600 1.35 186.18 Microsoft Windows XP SP2
    HP xw 8400 2.26 186.18 Microsoft Windows XP SP2

    System Requirements for Lustre Render Nodes

    The following table lists the supported hardware platforms for Incinerator Render Nodes, with the certified BIOS versions and operating system distributions for HP ProLiant Burn Render Nodes.

    Render Node BIOS Operating System DKU
    HP ProLiant DL160se G6 07/05/2009 Red Hat Enterprise Linux Desktop 5.3 with Workstation (64-bit) 7.5.0
    HP ProLiant DL160 G5 04/09/2008 Red Hat Enterprise Linux WS 4 Update 3 (64-bit) 7.5.0
    HP ProLiant DL140 G3 1.09 Red Hat Enterprise Linux WS 4 Update 3 (64-bit) 7.5.0

    Hardware Limitations

    Action CPU Burn Limitations:

    • Action setups cannot be rendered if the output format is set to 16-bit fp.
    • Action setups cannot be rendered if one or more layers are 16- bit fp.
    • Action setups cannot be rendered if Clamp Colours is disabled.
    • Action - Lights profile with range outside of 0,1 are not supported.
    • Action Old Blending modes (Subtract, Multiply, Exclusion, Spotlight when they are used with Surface blending curves or lens Distort are not supported.
    • Action Point or Spot lights are not supported.
    • Action New Lights are not supported
    • Action New Blending Modes are not supported.
    • Action Shadows are not supported.
    • Action IBL are not supported.
    • Action Lens Flares are not supported.
    • Action Rays are not supported.
    • Action Diffuse Maps with Softness are not properly processed.
    • EWA filters in Action cannot be applied.
    • Anisotropic filters in Action cannot be applied.

    Batch CPU Burn Limitations:

    • Batch Exposure node cannot be rendered.
    • Batch Matte Edge node - Noise functionality cannot be rendered.
    • Batch - Motif - 16 bit fp output resolution cannot be rendered.
    • Batch - Substance- 16 bit fp output resolution cannot be rendered.
    • Batch - Substance Noise node cannot be rendered.
    • Batch - Substance Splatter node cannot be rendered.
    • Batch | Desktop - RGB Blur Directional and Radial modes 16- bit fp output resolution cannot be rendered.
    • Batch | Desktop | SoftFX - Text 16-bit fp output resolution cannot be rendered.
    • Batch | Desktop - Auto-Stabilize 16-bit fp output resolution cannot be rendered.
    • Batch | Desktop - Burn-In 16-bit fp output resolution cannot be rendered.
    • Batch | Desktop - Glow Node Directional Blur 16-bit fp output resolution cannot be rendered.
    • Batch | Desktop - Distort 16-bit fp output resolution cannot be rendered.
    • Batch | Desktop - Color Frame Gradient cannot be rendered.
    • Batch | Desktop - Gradient node 16-bit fp output resolution cannot be rendered.

    Effects: CPU Burn Limitations:

    • Timeline FX - Axis 16-bit fp output resolution not supported.
    • Timeline FX - CC 16-bit fp output resolution not supported.
    • Timeline FX - Wipe 16-bit fp output resolution not supported.
    • Damage cannot be rendered.
    • Pixel Spread cannot be rendered.
    • Bump Displace cannot be rendered.
    • 2D Transform cannot be rendered.
    • Deform cannot be rendered.
    • Denoise cannot be rendered.

    Other CPU Burn Limitations:

    • Hardware Anti-aliasing is not supported.
    • 3D Blur cannot be rendered.
    • Substance cannot be rendered.
    • Effects - Damage - Bad rendering will occur when using Digital Video Damage Type.

    GPU Burn Limitations

    • Effects - Damage - Bad rendering will occur when using Digital Video Damage Type.

    Limitations with Old Graphics Cards

    • Action - Only projected Shadows are available on FX4500/FX5500 and older graphics cards due to hardware limitation that result in lower quality shadow.
    • Action - Only one IBL map per object on FX4500/FX5500 and older graphics cards as opposed to 2 on more recent cards.
    • Action - Seamless cube map (part of the IBL feature) do not work on FX5600, and older, graphics cards. Results are smoother on FX5800s. There is no loss of functionality on older graphics cards. 
    • Action – UV maps are not supported on FX5500 graphics cards.
    • Effects - Pixel Spread Stretch and Motion modes may present artefacts due to the lower precision on FX4500/FX5500, and older, graphics cards.
    • Effects - 2D transform - Artefacts may show up if motion blur or anti-aliasing are activated on FX4500/FX5500, and older, graphics cards.
    • Effects - Damage - Bad rendering will occur when using Digital Video Damage Type on FX4500/FX5500 cards.

    Compatibility

    Upgrade Compatibility

    Keep in mind the following information on software compatibility and limitations before upgrading to the current version.

    Autodesk recommends archiving your media and project data before you upgrade.

    Previous version Current Version
    Projects and clip libraries Are read-only. You cannot open a project created in a previous version of your software. However, you can access the clip libraries from those projects.
    • If the original project is on the same system, create a project in the current release and then copy the clip libraries from the old project to the new project. If you have many projects to upgrade, use the copyProjects script. See the Installation and Configuration Guide.
    • If the original project is on another system that has a previous version from 2007 onward installed, transfer the clip libraries to a project on the current system. See the Installation and Configuration Guide. Alternatively, you can archive the project from an older version and restore the archive in the latest version. See the help topics on creating and restoring archives.

    Note: You can only delete projects and clip libraries with the application version that created them.
    Archives Are read-only.
    Users Are incompatible. Create a user in the latest version. See the help for instructions on how to create a new user.
    Settings Are compatible (including most Sparks® setups).

    Archive Compatibility

    • Archives created using any current version of a Creative Finishing application are fully compatible with all other current Creative Finishing applications.
    • Archives created in the current version cannot be restored in earlier versions of Creative Finishing applications.
    • Archives created using earlier versions of Creative Finishing applications are read-only when restored to the current version. That is, you can restore an older archive in the current version, but you cannot append material to the archive (you must create a new archive).

    Important Issues

    • Make sure DKU 7.5.0 is installed. This DKU contains a new BIOS for z820 workstations. To install the BIOS, refer to the Fame Premium Installation and Configuration Guide for instructions.
    • The Wacom Intuos 5 graphics tablet is not supported on the HP Z800 systems.
    • If your workstation has more than one partition configured, only projects having media on the same partition will be able to share data through Wire from the Project tab.

    Fixed Bugs

    Key Component/s Summary
    FLPR-7741 Action Setups created in Flame 2011.1 are slow to load in 2013 SP3.
    FLPR-5098 Action Application crashes when processing action setup with Slip background and disabled default output.
    FLPR-5215 Action Action: ALT+Click to get rid of the animation on R, resets B and G channels as well.
    FLPR-5019 Action Copy and paste a Colour Correct in Action deactivates destination layer's crop.
    FLPR-4913 Action Objects added to scene appear at wrong position in schematic.
    FLPR-1375 Action Complete Scene naming consistency between Desktop and Batch.
    FLPR-1181 Action Node Bin tabs are missing after exiting and re-entering Action.
    FLPR-4979 Action Crashes when enabling wireframe mode in text and Lens Flare is present on ATI card.
    FLPR-6874 Action - FBX Export FBX camera: The rotation order result is only exported as XYZ.
    FLPR-1411 Action - FBX FBX loses connections and orientation when exported and then re-imported.
    FLPR-7022 Action - FBX ZXY rotation order in FBX import is not properly preserved.
    FLPR-1452 Animation Editor Wrong timewarp applied to a source clip after doing a 4-point edit.
    SMOK-5009 Archive / Restore When archiving the library with Verify Archive Data, errors occur in the process and slates are corrupted.
    SMOK-2063 Archive / Restore Archiving: Pre-archive validation with in-UI reporting.
    SMOK-4204 Audio Audio Output Delay does not work with decimal values.
    SMOK-2011 Backburner Can't send jobs to Backburner Manager on Windows.
    FLPR-7884 Batch When loading the filter setup, the effect value is always at 100%.
    FLPR-6571 Batch Crashes in Batch when using a MUX node as an input to an Action node, with an external layer connected to a paint node, then entering the modular keyer on a 2nd external layer.
    FLPR-6245 Batch Batch: If descriptor's limit is reached, you cannot save batch setups.
    FLPR-5300 Batch Entering and exiting Batch with a Timewarp node that had cache turned off, turns cache back on in the node.
    FLPR-64 Batch Distort: Matte out feeding Front does not work.
    FLPR-3034 Batch Schematic Batch navigator creeps up the screen.
    FLPR-7000 Colour Corrector / Colour Warper Negative clamping clamps the whites as well as the blacks.
    SMOK-5403 Conform Specific XML generates crash, out of memory error.
    SMOK-3923 Conform AAF file from an AMA MP4 import does not provide the MP4 media files path(s).
    FLPR-1443 Creative tools Using clips with different bit-depths for the Front and Matte inputs on the Timewarp node creates corruption.
    FLPR-909 Creative tools Tools tab icons should be disabled while rendering.
    FLPR-779 Creative tools Interlaced stereo clip is inverted L/R eyes on FLAME FX's Stereo
    FLPR-1447 Creative tools If you click a node inside distort, exit to Batch Schematic and try to copy the Distort node with the copy keyboard shortcut, it will copy the schematic node selected inside Distort instead of the actual Distort batch node.
    FLPR-1211 Creative tools Applying smoothing to GMask causes display problems in Batch proxy view.
    FLPR-2789 Creative tools Batch: Directional Blur bias value not saved.
    FLPR-778 Creative tools AutoStabilize with Tile Repeat fed by Action node might cause black lines in result image.
    FLPR-5768 Creative tools Matchbox: page/tab titles defined in an xml are ignored in the UI.
    SMOK-9139 EditDesk & Desktop & Editing tools Timeline: Cannot select a gap on a layer if it is not defined by a preceding/following clip.
    SMOK-6316 EditDesk & Desktop & Editing tools Crash: Various scenarios that involve editing in the timeline and containers.
    SMOK-4909 EditDesk & Desktop & Editing tools Matched clip doesn't have a name if the original clip was Hard Commit then renamed.
    SMOK-2322 EditDesk & Desktop & Editing tools Timeline: Overwriting with source clip causes video layer shift.
    SMOK-8828 Hardware Configuration and OS Red Hat 6 : Library clip displays the message "pending render" after reboot.
    SMOK-8199 Hardware Configuration and OS On rhel6.2 kickstart should configure automount to use /hosts.
    SMOK-6988 Hardware Configuration and OS Red Hat 6.2: Stereo Capture not accurate and frames might be dropped.
    SMOK-8202 Hardware Configuration and OS X server crashes if user logs out with Intous5 pen in close proximity to the tablet.
    SMOK-8198 Hardware Configuration and OS Graphics are severely corrupted and the display un-readable when Z820 is shut down.
    SMOK-8197 Hardware Configuration and OS In rhel6.2 the KDE task bar displays when the mouse is at the edge of the screen over the task bar area.
    SMOK-5226 Hardware Configuration and OS '' DLvideo error , NO video list '' message should be more precise when troubleshooting video hardware or Driver setup.
    SMOK-6702 Hardware Configuration and OS dlConfigCheck reports wrong DVS HD firmware version on HP8400.
    SMOK-8509 Installation & Software Config In Xorg.conf provided by Autodesk, graphic cards are defined as Quaddro, should be Quadro.
    SMOK-1732 Installation & Software Config CER 9428491 : Crash on start-up when launching the application with unsupported hardware.
    FLPR-5042 Keyers Crashes on exit after using modular keyer to add a Paint Node.
    FLPR-791 Keyers Modular Keyer: Bad refresh on Matte with GMask on MBlend input2 in Context view.
    SMOK-5048 Network Wiretap servers cannot start if MulticastPort is different from default value.
    SMOK-1734 Project Management: Project Network configuration problem leads to crash.
    SMOK-2386 Read File Node ProRes Wiretap Gateway imports do not work with big endian audio.
    SMOK-399 Read File Node Variable framerate QuickTime clips missing frames on import.
    SMOK-7581 Sparks Batch assert if a spark call sparkError while processing.
    FLPR-7828 Text Certain .otf fonts are only partially loaded in the application (limited to number characters).
    FLPR-769 Warper / Distort Distort: Link Src & Dest does not work when more than 1 point is selected.
    SMOK-8670 Wire Corruption on clips being wired over InfiniBand.
    SMOK-7503 Wiretap python API client library not updated for python 2.6
    SMOK-7356 Wiretap Gateway Filenames with commas do not import/scan via wiretap gateway.
    SMOK-2970 Wiretap Gateway AVCHD import with Store Local Copy results in skipping frames.
    SMOK-1747 Wiretap Gateway Playback issue with 25p and 50p MTS file.
    SMOK-4758 Wiretap Gateway Gateway times out on specific file.
    SMOK-5931 Wiretap Gateway QuickTime long GOP clips: performance is slow when using the gateway with stored local copy.
    Key Component/s Summary
    FLPR-8193 Lustre: Colour Grading Thumbnail colour updates disappear.
    FLPR-5164 Lustre: Colour Grading Linear Gamma not working as expected in Lustre.
    FLPR-5503 Lustre: Hardware Configuration and OS Lustre won't start if workstation has a Mellanox QDR InfiniBand adapter.
    FLPR-6561 Lustre: Legacy Editing Legacy editing functions do not work with Multi clips.
    FLPR-243 Lustre: Legacy Editing Scene Detect tool does not work just after starting Lustre in a new project.
    FLPR-5802 Lustre: Preferences / Project / User & Hotkey management Project: Lustre crashes when loading a project if it can't access a host while Auto Reparse is enabled.
    FLPR-6014 Lustre: Render One Sequence Render requires using Shit-P to see new renders.
    FLPR-4159 Lustre: Render Render: Generate proxy does not generate proxies for the matte media.
    FLPR-5795 Lustre: Timeline Lustre crashes when loading certain CMX3600 EDLs.
    FLPR-293 Lustre: Tools Error messages: too many error in console when Selector copy from R3D file.

    Known Bugs

    Key Component/s Summary
    FLPR-8224 3D Interop: FBX file format Crash when rendering an fbx setup with point cache in 16-bit float.
    FLPR-8027 Action 3D text. Mimic link refresh error. Workaround: Copy/Paste the 3D Text once the modifications are done.
    FLPR-7987 Action Crash when scrolling image resolution settings with an Atomize node.
    FLPR-8221 Action FBX: crash when changing a solid to original wireframe on a non-triangle polygon.
    SMOK-9981 Archive / Restore Cannot archive a project that was first restored from an archive which then included multiple workspaces.
    SMOK-10061 Archive / Restore Selecting a Media Library folder and a Desktop/Batch Snapshots folder, or a Shared Folder and a Desktop/Batch Snapshots, and drag and drop to archive = crash. Workaround: Do not use multiple select.
    SMOK-9787 Archive / Restore If the target volume for archive is too small, the archive size estimate fails.
    SMOK-9817 AVIO Input Clip crashes on Play and Log Events if the option "EDL Log On Out" is enabled.
    FLPR-8053 Batch Motion Blur Node: "Trails" blur type does not work.
    FLPR-8123 Batch UI corruption when Paint has front and matte input from Action. Workaround: Click anywhere to refresh.
    SMOK-9827 Batch Read File node: Resize and LUT modifications are not applied to a clip with versions. Workaround: Apply the resize or LUT at the LOAD level or after, using a Resize or LUT Editor batch node.
    FLPR-8282 Burn Batch Render node only send Result to Burn, out matte is missing. Workaround: Use the render node to render each result separately.
    FLPR-8151 Colour Management When Flame Reactor is enabled, the Clip node and the Read Node do not support 3D LUT if the node output is set to 16-but fp. Workaround: Import the footage through the MediaHub with a 3DLUT.
    FLPR-8283 Colour Management Viewer data type (Linear/Video) problem with refresh. Workaround: Change the Viewer data type manually.
    SMOK-9983 Conform workflow Handles are not consolidated when linking sources to XML or AAF sequences.
    FLPR-8187 Control Panel The Tangent Element panel is not initialized the first time you launch Flame after install. Workaround: Relaunch Flame Premium (or launch Lustre first).
    FLPR-8127 Creative Tools Corruption occurs when using Digital Video Damage Type in the Damage effect when Classic Engine is chosen as the Project Rendering Mode. Workaround: For NVidia FX5600 graphics cards and more recent models: Choose Flame Reactor in the Project Rendering Mode box.
    FLPR-8169 Creative Tools Auto-detection in Remove Pulldown gives poor results. Workaround: Use standard remove pulldown instead of the auto-detect.
    FLPR-8149 Creative Tools The Proxy Regeneration tool in the Utilities tab does not work.
    FLPR-8116 Creative Tools Crash entering Resize from the timeline FX with the Broadcast toolbar displayed. Workaround: Enable the Viewport Monitoring option before entering the Resize Effect.
    SMOK-10042 Data Management AUTO_BACKUP folder keeps the deleted folders, and this can fill up the system disk.
    SMOK-9945 Data Management Scrubbing the thumbnail of a clip in a remote project makes it update slowly, and go black on mouse-up. Workaround: Use the Previewer to scrub the clip.
    SMOK-8780 Data Management Unlink Reloadable is not available.
    SMOK-5582 Data Management Crash when interrupting proxy generation.
    SMOK-9611 Desktop & Editing Tools After using contextual menu to Duplicate clip, the focus is on the original clip.
    SMOK-9672 Desktop & Editing Tools Using Export from the contextual menu on the Sequence viewer or Storyboard record clip exports the last selected clip. Workaround: Always export from the Workspace panel or drag-and-drop in the MediaHub to make sure you export the correct clip.
    FLPR-8152 Desktop & Editing Tools Reels in Reverse mode aren't behaving properly when deleting clip
    FLPR-7957 Desktop & Editing Tools Reels view disappears when double-clicking Batch source to display Player, then switching to Tools tab. Workaround: Use the Layout box to switch back to Desktop Reels (or Thumbnails) view.
    SMOK-9784 Desktop & Editing Tools Contextual-menu Export won't work on the Sequence Viewer if the displayed sequence is not in the folder currently viewed. Workaround: View the folder where the sequence is actually located, and then use the contextual menu to export from there.
    FLPR-8098 Interop Lustre Smoke Interoperability: Burn can't render to Wiretap if the folder name has spaces. Workaround: Do not insert spaces on the folders in your project.
    FLPR-8235 Interop Lustre Smoke Interop: Can't access the snapshots with the Wiretap server. Workaround: Manually restore the snapshot into an active Reel or Desktop folder.
    SMOK-9783 Media Export/Import Importing or exporting with Colour Transforms containing offsets with different in/out bit depths gives incorrect result.
    SMOK-9720 Media Export Sequence Publish: filename is wrong if the filename pattern field contains <name> and Use Timecode is enabled.
    SMOK-9589 Media Export Export of a sequence aborts if it contains an empty audio track. Workaround: Delete the empty audio tracks.
    SMOK-9430 Media Export Export fails if there are muted effects in the timeline. Workaround: Delete muted effects.
    SMOK-7193 Media Import R3D decoding performance issues on a system with a Red Rocket
    SMOK-6740 Media Import Scrubbing H.264 or long GOP material makes the application sluggish. Workaround: Set Cache source media to ON when importing H264 or long opt material. Wait for cache jobs to finish.
    SMOK-10032 Media Import YUV Headroom issues when using QuickTime MPEG4 codec. Workaround: Always use the include headroom option for mpeg4 QuickTimes. This will give the proper result for legal-range clips. For full-range clips, highlights will still be clamped.
    SMOK-9967 Media Import Using High Dynamic Range option on a non-HDR R3D clip corrupts the clip; it also crashes anyone browsing the clip from a remote project. Workaround: In MediaHub > Files, set Format Specific Options > R3D > Colour > HDR Settings to anything but "High Dynamic Range".
    SMOK-9865 Media Import The Edit Pre-Processing button is not always visible. Workaround: In the TimelineFX pipeline, click the clip's thumbnail to display the Edit Pre-Processing button.
    SMOK-9587 Media Import "Operation timed out" caused by certain MXF files found in the browsed folder.
    SMOK-9531 Media Import Audio tracks are offset in a QuickTime import.
    SMOK-9530 Media Import Apply YUV Headroom option truncates the headroom from FULL ProRes clips.
    SMOK-8919 Media Import MediaHub > Projects: Multiple selection is not available in thumbnail and list views. Workspace: Use Workspace view.
    SMOK-9828 Media Import Read File node & Edit Pre-Processing in Timeline for R3D clips: the resize crop is up/down inverted. Workaround: Crop the source while looking at the result. or Apply a Flip isolate the element, and then remove the Flip.
    SMOK-9984 Media Management: Workspace MediaHub > Projects: Crash when trying to open the Desktop of a Smoke project.
    SMOK-9993 Media Management: Workspace Unable to delete a project if there is a dead lock on a workspace. Workaround: Delete the 'workspace.xml-lock' files found in /usr/discreet/clip/stonefs<X>/<project>/<workspace>/.
    SMOK-9977 Media Panel Flame loads wrong workspace when you open a project that has multiple workspaces from Project and User Settings. Workaround: To switch project, quit and relaunch Flame to open the project from the Flame start screen.
    SMOK-9951 Media Panel Should not be able to render clips into a Shared Folder without Write Access.
    SMOK-9845 Media Panel Write Access is not released when quitting a workspace.
    SMOK-9673 Media Panel Crash editing project after render.
    SMOK-9419 Media Panel Shared Folders: Cannot drag-and-drop or Import to top level of Shared Folders. Workaround: Create the sub-folder manually and copy in the contents.
    SMOK-9946 MediaHub - Project Crashes when browsing a remote project and using the Previewer's full-screen mode.
    SMOK-9852 MediaHub - Project Applying a LUT before loading a project from the MediaHub causes a crash.
    FLPR-8071 Paint & Batch Paint Crash drawing in proxy view after disabling bypass.
    SMOK-8983 Player Timeline with H.264 (long GoP) material results in GFX drops during playback. Workaround: Set Cache source media to ON when importing. Wait for cache jobs to finish.
    SMOK-9851 Preferences / Project / User & Hotkey management Some Resolution Templates show discrepancies in the Project Creation dialog box. Workaround: Set the resolution manually at 1920 by 1035 using the width and height sliders.
    SMOK-9620 Sparks Colours are incorrect when loading a setup from a previous release from Sapphire Sparks 4. Workaround: Recreate the effect using Sapphire Sparks 4 in this version.
    FLPR-8109 Timeline Crash exiting when in a Colour Corrector timeline FX and when a Delete/Cut/Load event is in the undo buffer.
    FLPR-8054 Timeline FX Gesturally moving an image when in the Axis menu adds a keyframe even if Autokey is off. Workaround: Toggle AutoKey On/Off in the editor.
    FLPR-8069 Views & Multiviews You may notice a delay when using the Viewport Layout box to change the viewport layout. Workaround: Use the Keyboard Shortcuts to change the viewport layout.
    FLPR-8067 Views & Multiviews Axes or vertices may jump when the broadcast monitor focus is on Action Schematic in a multiview layout. Workaround: Set the monitor on any other view than the Action Schematic.
    SMOK-9961 Wire A Mac-Gateway ProRes clip imported on a Linux workstation and wired to another Linux results in the corruption of the wired clip.
    SMOK-9930 Wire Second Wire transfer of the same clip results in a checkerboard clip.
    SMOK-9887 Wire Wire: Use Remote/Use Local Machine option for background wire does not work as expected.
    SMOK-9870 Wire Crash when scrubbing media in the Previewer of the MediaHub > Projects, after first loading a project.
    SMOK-9860 Wire In MediaHub > Projects, the message "Workspace is out of date..." appears even if the Workspace has not been modified. Workaround: Restart navigation to the workspace, and from the top of the MediaHub > Projects hierarchy, click refresh.
    SMOK-9661 Wire No UI update when exporting a Batch Snapshot through MediaHub>Projects. Workaround: To update the content of the Batch Snapshot folder after exporting the Batch Snapshot, click Home and then select Gear Menu > Refresh. Navigate back to the folder to display its updated content.
    SMOK-9590 Wire In MediaHub > Projects, the Export button disappears after a Wire. Workaround: Click in the Projects area to bring back the Export button.
    SMOK-9503 Wire MediaHub > Projects: .files appear in the browser when they should not.
    SMOK-9352 Wire MediaHub > Projects: Crash when scrubbing an expanded clip from a remote project.
    SMOK-9986 Wire MediaHub > Projects: Background wire is not initialized properly, as after Install, 1st session is done in foreground. Workaround: Disable and then enable MediaHub > Projects > Background Wire.
    SMOK-9955 Wire MediaHub > Projects: Newly created Shared Folders do not appear after a Refresh. Workaround: Go up one level in the folder hierarchy, and then go back into the project.
    SMOK-9432 Wiretap You will not be able to do a Cleaner Export from 2013 software if the 2013 extension 1 version of Wiretap server is running. Workaround: Change the version of Wiretap server running to match the version of the software you are using. In a shell or terminal, go to /usr/discreet/<application_version>/bin. As root, run ./selectWiretapVersion.py. This script tells you which version of Wiretap server is currently running. Type the number that corresponds to the version you wish to run. The selected Wiretap server will be activated. If you want to go back to another Wiretap server version, repeat these steps. If Wiretap server fails to start you can use this command: /usr/discreet/sw/sw_restart. This restarts Stone & Wire and Wiretap services.
    Key Component/s Summary
    FLPR-8018 Lustre: Colour Management Transcoding Float RGB gives wrong result with Colour Transform.

    Comments0

    Powered by MindTouch
    © Copyright 2013 Autodesk, Inc. All rights reserved.   Privacy Policy — Legal Notices & Trademarks