Verify the Published Part

1. Create an assembly file by using the standard mm assembly template.
2. On the ribbon, click Assemble tab Component panel Place from Content Center.
3. In the Category View panel, expand the Structural Shapes category, and select the Channels category. Locate the Sheet Metal Channel family.
4. Double-click the Sheet Metal Channel family.
5. Select the 125-mm member in the channel_length field, and click Apply. An occurrence of the part is placed in the assembly.
   
6. Right-click in the graphics window and select Done to finish the placement of the first family member. The family dialog box displays again.
7. Select the 200-mm length member, and click OK.
8. Click in the graphics window to place the longer part.
   
9. Right-click, and select Done.

Previous | Next