Place an Exploded View on a Drawing

1. Click Open.
2. Select the Cylinder Clamp.idw drawing that was saved during the Drawings tutorial.
3. Right-mouse click on the Cylinder Clamp.idw node at the top of the Model browser, and click New Sheet on the pop-up context menu.
4. On the ribbon, click Place Views tabCreate panel Base, or right-click and select Base View from the marking menu. The Drawing View dialog box displays.
5. By default, Cylinder Clamp.iam displays in the File name field. Click the down arrow at the right side of the field and select Cylinder Clamp.ipn from the drop-down list.
6. Next, click Current in the Orientation area of the Drawing View dialog box.
7. Click the drawing sheet to place the exploded view.
   
8. Right-click and select Done [Esc] to finish placing additional views.
9. Click Save.

Previous | Next