Insert Profile - Place Other Members

Now, we use the sketches to place the other members of the frame.

1. On the ribbon, click Design tabFrame panel Insert Frame.
2. Select DIN EN 10219-2 (Circular Hollow Section - Cold Formed) from the Family menu.
3. Select 26.9x3 from the Size menu.
4. Enter -3 mm in the Vertical Offset field.
5. Enter 0 in the Horizontal Offset field.
6. Select 90.00 deg from the Angle menu.
7. Set the orientation indicator, as shown in the following image.
   
8. Select the five sketch segments as shown.
   NoteDepending on where you select on the first element, you may need to adjust the orientation and angle to match the preview in the image.
   
9. Click Apply.
   

Previous | Next