Publish the Elbow

Publishing the part adds it to the Content Center. Publishing parts requires a read/write library which we configured earlier in the tutorial.

1. On the ribbon, click Manage tab Content Center panel Publish Part.
2. Select RW Temp (or your read/write library) from the library menu.
3. Click Next.
4. Ensure that Elbows is specified in the category menu.
5. Click Next.
6. Click Next again.
7. In the Table Columns field, select the NominalSize parameter, then click Add to add this parameter to the Key Columns field.
8. Click Next.

   The part name is entered in the Family Name field by default. Leave this field unchanged.

9. Click Next.
10. Click Publish.

    A message indicates that the publish operation was successful.

11. Close self-drain_elbow.ipt. Do not save changes.

Previous | Next