Drawing Overview

You draw when you are placing lines and points to create a form. You can draw on the following elements:

• Planar surfaces (all sketching tools)
• Non-planar surfaces (lines, rectangles, and splines)
• 3D levels
• 3D reference planes
• reference points

3D levels and 3D reference planes are automatically detected. They highlight in the drawing area as the cursor moves over them. Click to select one of these to set it as the active work plane.

1. Click Create tabDraw panel Line.
   NoteIf you want to draw a reference-based form, click Create tabDraw panel Reference before selecting a drawing tool. See Unconstrained and Referenced-Based Forms.

   Several options become available on the Options Bar. You can set the placement plane, create a surface by drawing closed profiles, draw a chain of lines, and set an offset or radius value.

2. Click Modify | LinesDraw panel Draw on Face to draw on a surface, or click Modify | LinesDraw panel Draw on Work Plane to draw on a work plane.
3. Click in the drawing area, and draw a line.
4. Click Create tabSelect panel Modify.