Creating Stairs by Sketching Runs

1. Open a plan or 3D view.
2. Click Architecture tabCirculation panelStair drop-down (Stair by Sketch).
3. Click Modify | Create Stairs Sketch tabDraw panel Run.

   The Line tool is selected by default. Select a different tool on the Draw panel if desired.

4. Click to start the run.
   

    

   Click start point on left side

5. Click to end the run.
   

    

   Click endpoint on right end

6. Optionally, specify a railing type for the stair. See Specifying the Railing Type for New Stairs.
7. Click (Finish Edit Mode).

Completed stairs in 3D with default railings and balusters

1. Click Architecture tabCirculation panelStair drop-down (Stair by Sketch).
2. Click Modify | Create Stairs Sketch tabDraw panel Run.

   The Line tool is selected by default. Select a different tool on the Draw panel if desired.

3. Click to start the run.
4. Click to position the landing when the desired number of risers have been reached.
5. Drag the cursor along the extension line and click to start drawing the remaining risers.
6. Click to finish the remaining risers.
7. Click (Finish Edit Mode).

Example

First run of stairs- 9 risers created with 9 remaining

Additional run of stairs perpendicular to the original

Completed sketch with landing created automatically

You can modify a stair footprint that you have sketched using one of the drawing tools.

1. Select the stairs.
2. Click Modify | Stairs tabMode panel Edit Sketch.
3. Click Modify | Stairs > Edit Sketch tabDraw panel, and select the appropriate drawing tool to make your changes.

Example

In the following image, the sketch of the landing was modified using the Start-End-Radius Arc drawing tool

Modifying a run of stairs

Finished sketch with landing modified

Also, you can modify the stairs you sketched by changing their instance properties on the Properties palette. To access the type properties, click Edit Type on the Properties palette.