Product help with community knowledge
2012
Simulation Moldflow
HomeSimulation MoldflowEnglish2012HelpAdviserLearning ResourcesTutorialsUsing the ribbon UIParting plane

Community Scoring

Was this page helpful?

Tag Tags0

This page has no tags

Page statistics

801 views,  1 edit(s),  5178 characters(s) Page last modified 23:11, 3 Jun 2012 by contentconnector
How to add your knowledge

Parting plane

    Table of contents
    No headers
    1. Select File:Moldflow/enu/2012/Help/1Adviser/101_Learning_Resources/100_Tutorials/100_Using_the_ribbon_UI/160_Parting_plane/single_cavity_16.png (Home tab > Mold Type panel > Single Cavity).

      File:Moldflow/enu/2012/Help/1Adviser/101_Learning_Resources/100_Tutorials/100_Using_the_ribbon_UI/160_Parting_plane/single_cavity.png

    2. Click File:Moldflow/enu/2012/Help/1Adviser/101_Learning_Resources/100_Tutorials/100_Using_the_ribbon_UI/160_Parting_plane/geometry_16.png (Home tab > Create panel > Geometry).
    3. Click File:Moldflow/enu/2012/Help/1Adviser/101_Learning_Resources/100_Tutorials/100_Using_the_ribbon_UI/160_Parting_plane/set_partingplane_16.png (Geometry tab > Mold panel > Set Parting Plane), to open the Set parting plane dialog.
      File:Moldflow/enu/2012/Help/1Adviser/101_Learning_Resources/100_Tutorials/100_Using_the_ribbon_UI/160_Parting_plane/parting_plane.png
      The model is displayed with the mold outline and a red line and square grab handles across the model. This line represents the parting plane.
    4. Ensure the Display Grid and Snap to grid check-boxes in the Grid settings box are selected.
    5. Click Bottom then Apply. The parting plane has been automatically set at the bottom of the cavity and an outline of the proposed mold is displayed.
    6. Click Close to close the Set parting plane dialog.

    Comments0

    Attach Files

    Files5

    Powered by MindTouch
    © Copyright 2013 Autodesk, Inc. All rights reserved.   Privacy Policy — Legal Notices & Trademarks