- 360 Publisher
- Alias
- AutoCAD
- AutoCAD Civil 3D
- AutoCAD Electrical
- AutoCAD for Mac
- AutoCAD LT for Mac
- AutoCAD Map 3D
- BIM 360 Glue
- Building Design Suite
- Constructware
- Creative Finishing
- Design Review
- Factory Design Suite
- Flame Premium
- Green Building Studio
- Infr. Map Server
- Infrastructure Modeler
- Installation Help
- Inventor
- Inventor ETO
- Inventor Fusion
- Inventor Fusion Technology for Mac
- Inventor LT
- Inventor Publisher
- Navisworks
- Navisworks Freedom
- PLM 360
- Product Design Suite
- Project Galileo
- Project Photofly
- Project Simulus
- Revit
- Revit LT
- Robot Structural Analysis Professional
- Sim 360 Pro and Sim 360 Moldflow
- Simulation 360
- Simulation CFD
- Simulation DFM
- Simulation Job Manager
- Simulation Mechanical
- Simulation Moldflow
- Simulation Moldflow Adviser
- Simulation Moldflow Communicator
- Simulation Moldflow Insight
- Simulation Moldflow Insight 360
- Smoke
- Vasari
- Vault
Table of contents
- 1. Tasks list
- 1.1.1. Topics in this section
This tutorial addresses the steps, following meshing, that are required before a model can be analyzed.
Tutorial duration: Approximately 65 minutes.
Up to this point, we have concentrated on ensuring that the model imported into Autodesk Simulation Moldflow Insight is meshed correctly and is free of errors. It is a critical step, as the quality of the analysis depends upon a quality mesh. There are several other steps required before a model can be analyzed and these will be covered in this tutorial.
- Specify the molding process being used for the manufacture of the part.
- Specify the material being used to mold the part.
- Manually duplicate a model.
- Set the injection location.
- Automatically duplicate the model to produce a four-cavity mold.
- Design a basic runner system.
- Design a simple cooling circuit.
- Review results of a basic Fill analysis.
Analysis Overview and the task required. Topics in this section
- Selecting the molding process
In this task, you will select the molding process and the analysis sequence, that is, the series of analyses that will be performed.
- Selecting the material
In this task, you will select a molding material.
- Manual cavity duplication
In this task you will complete the steps required to duplicate a cavity manually.
- Designing a multi-cavity layout
In this task, you will use the Cavity Duplication Wizard to duplicate the part to produce a four-cavity layout.
- Designing a runner system
In this task, you will use the Runner System Wizard to design a runner system for the four-cavity layout you created in the previous task.
- Designing a cooling circuit
In this task, you will design a simple cooling circuit layout using the Cooling System Wizard.
- Basic model analysis
In the previous tasks, you prepared the tutorial model for analysis. You selected a material, designed a multi-cavity mold, and modeled the runner system and cooling system.
- Tutorial review
This tutorial has given you an overview of the basic steps required to prepare a mold for analysis and review the analysis results.
Comments0
Attach FilesFiles1
| File | Size | Date | Attached by | |||
|---|---|---|---|---|---|---|
| ac.menuaro.gif No description | 63 bytes | 10:40, 5 Jun 2012 | contentconnector | Actions | |
