Product help with community knowledge
2013
Simulation Moldflow
HomeSimulation MoldflowEnglish2013HelpInsightModelingPreconditioning data dialog

Simulation Moldflow

2012
2013
Help
Installation and Licensing
Insight
Autodesk Simulation Moldflow Insight Help
Visual Learning
Release notes
Tutorials
Getting Started
User Interface
Import and Export
Modeling
Toolbox
Using filters when modeling or meshing
Recommended modeling details
Geometry
Select Entity Types dialog
Entity type list
By entity types
By properties
Add to current selection
Select associated nodes also
Query Entities tool
Display or text
Display mesh/model
Place results in diagnostics layer
Restrict to visible entities
Expand Selection dialog
Expand current selection by number of levels
Put expanded entities into a new layer
Save Selection List dialog
Name for selection list
Delete Selection List dialog
Choose selection list to delete
Create Line tool
Coordinate 1
Coordinate 2
Absolute or Relative
Automatically create nodes at end points of curve
Create as
Filter
Arc by Points tool
Coordinate 1
Coordinate 2
Coordinate 3
Automatically create nodes at end points of curve
Arc or Circle
Create as
Filter
Arc by Angle tool
Center
Radius
Starting angle
End angle
Automatically create nodes at end points of curve
Create as
Filter
Spline tool
Coordinates
Selected coordinates
Add
Remove
Automatically create nodes at end points of curve
Create as
Filter
Connect Curves tool
Select the first curve
Select the second curve
Fillet factor
Automatically create nodes at end points of curve
Create as
Filter
Break Curve tool
Select first curve
Select second curve
Automatic apply when selection complete
Create as
Filter
Node by Coordinate tool
Coordinate
Create as
Filter
Node Between Coordinates tool
Coordinate 1
Coordinate 2
Number of nodes
Automatic apply when selection complete
Create as
Filter
Select a curve
Number of nodes
Create nodes at ends of curve
Create as
Filter
Node By Offset tool
Base coordinate
Offset vector
Number of nodes
Create as
Filter
Node By Intersect tool
Intersecting curves
Intersection coordinate
Automatically create nodes at end points of curve
Create as
Filter
Region by Boundary tool
Curves
Select curves
Search
Create as
Filter
Region by Nodes tool
Select nodes
Create as
Filter
Region By Ruling tool
Select first curve
Select second curve
Automatic apply when selection complete
Create as
Filter
Region by Extrusion tool
Select curve
Extrusion vector
Create as
Filter
Regions from Mesh/STL tool
Tolerance
Planar
Angular
Create from
STL
Mesh
Create as
Filter
Hole by Boundary tool
Select region
Select curves
Enable automatic search for connected curves
Create as
Filter
Hole by Nodes tool
Select region
Select nodes
Create as
Filter
Modify CAD geometry with Autodesk Inventor Fusion
Surface defects
Surface Boundaries Diagnostic tool
Check outer boundaries
Check inner boundaries
Display or text
Display mesh/model
Place results in diagnostics layer
Restrict to visible entities
Surface Connectivity Diagnostic tool
Find free edges
Find non-manifold edges
Display or text
Display mesh/model
Place results in diagnostics layer
Restrict to visible entities
Surface Repair Tools-Locate Surface Ties tool
Located surface ties list
Create as
Filter
Surface Repair Tools-Edit Surface Ties tool
Surface 1
Surface 2
Surface topology tree
Create as
Filter
Surface Repair Tools-Delete Surface Ties tool
Surface ties to delete list
Create as
Filter
Mold
Mold surface temperature profile dialog
Mold surface temperature controller: Top
Parting Surface dialog
Interface conductance
Cavity duplication (Quick Reference)
Number of cavities
Columns
Rows
Column spacing
Row spacing
Offset cavities to align gates
Use defaults
Preview
Preconditioning data dialog
Pellet diameter
Pellet length
Transfer pot temperature
Delay time in the pot
Stop flow calculation when pellet volume is smaller than filled volume
Injection locations
Feed system
X:
Y:
Center of Mold
Center of Gates
I would like to use a hot runner system
Parting plane Z
Top
Bottom
Gate Plane
Runner System Wizard-Sprue/Runners/Drops
Sprue
Orifice diameter
Length
Included angle
Runners
Diameter
Trapezoidal
Included angle
Drops
Bottom diameter
Included angle
Runner System Wizard-Gates
Side Gates
Orifice diameter
Included angle
Length
Angle
Top Gates
Start Diameter
End Diameter
Length
Cooling system
Mold Block Surface dialog
Mold material
The mesh
Molding processes
Analysis sequence
Materials and databases
Process settings
Optimization
Launching an analysis
Results
Reports
Reference materials
Troubleshooting guide
Application Programming Interface (API)
Glossary of Terms
Insight 360
Adviser
Communicator
Simulation TV
Videos
Community

Community Scoring

Was this page helpful?

Tag Tags0

This page has no tags

Page statistics

766 views,  1 edit(s),  1762 characters(s) Page last modified 11:41, 5 Jun 2012 by contentconnector
How to add your knowledge

Preconditioning data dialog

    Table of contents
    No headers

    This dialog is used to specify the data that will be taken into account for the calculation of the temperature of the molten plastic, or melt, as it starts to flow into the cavity.

    To access this dialog, ensure that you have selected one of the Reactive Molding processes and an analysis sequence that includes Fill+Pack, click (Home tab File:Simulation_Moldflow/enu/2013/Help/Insight/0670-Modeling670/1096-Precondi1096/ac.menuaro.gif Molding Process Setup panel File:Simulation_Moldflow/enu/2013/Help/Insight/0670-Modeling670/1096-Precondi1096/ac.menuaro.gif Process Settings), then click Edit Data... in the Preconditioning analysis section of the dialog.

    Comments0

    Attach Files

    Files1

    FileSizeDateAttached by 
     ac.menuaro.gif
    No description
    		63 bytes11:41, 5 Jun 2012contentconnectorActions
    Powered by MindTouch
    © Copyright 2013 Autodesk, Inc. All rights reserved.   Privacy Policy — Legal Notices & Trademarks