To access this dialog, ensure that you have selected one of the Reactive Molding processes and an analysis sequence that includes, at a minimum, Fill. For Reactive Injection-Compression Molding, this is the only option. For Reactive Molding this includes . Click ( ), and click to open the Reactive Molding Advanced Options dialog. You may need to navigate to the next page of the Wizard to find the button.
|Select and edit the material to analyze.|
|Allows you to select and edit a process controller to control the injection molding process during the analysis. You can control the filling phase, velocity/pressure switch-over point, pack/holding phase, mold temperature and mold-open time.|
|Allows you to select and/or edit a predefined compression press controller to be used for the Injection-compression analysis.|
|Select and edit an injection molding machine to simulate your molding machine during the analysis. You can configure the injection unit, hydraulic unit, and clamping unit.|
|Allows you to select and edit the mold material to be used during the analysis. You can specify the density, specific heat, and thermal conductivity of the mold material.|
|Allows you to select and edit the solver parameters to be used during the analysis.|