Table of contentsNo headers
Specifies the initial length and measurement details of the filler material.
The parameters are:
The length of the fillers or fibers before the molding process begins.
NoteFibers having an initial length longer than 1 mm are generally considered as long fibers.
The method used to measure the initial length of the fillers or fibers. Options include:
- Not specified. This is the default setting used when no filler length value is supplied.
- Optical Reflectometer
- Other method
- Supplemental. This setting indicates that the filler data has been supplemented with a reasonable initial length value, which is not the result of material-specific measurement.
The year in which the filler length was measured.