Calculate fiber orientation using

This option specifies the model used by the Midplane/Dual Domain Fiber analysis solver to calculate fiber orientation.

The following options are available:

Moldflow model with auto-calculated Ci and Dz values

Select this option if you want the solver to automatically calculate a suitable Dz value based on the averaged part thickness, and then automatically calculate a suitable Ci value based on an empirical function including the calculated Dz value, the fiber volume fraction, and the fiber aspect ratio.

Moldflow model with auto-calculated Dz and specified Ci

Select this option if you want the solver to automatically calculate a suitable Dz value based on the averaged part thickness, but you want to use a specific Ci value. Specify the desired value in the Coefficient of interaction (Ci) text box.

Moldflow model with specified Ci and Dz values

Select this option if you want to specify both the Ci and Dz values to be used in the fiber interaction calculations. Click Edit settings to display the Fiber Interaction Calculation Parameters dialog.

RSC or ARD-RSC model (determined by length)

Select this option if you want the solver to calculate the fiber orientation using the Reduced Strain Closure model (for short fiber-filled materials) or the Anisotropic Rotary Diffusion model (for long fiber-filled materials) combined with the Reduced Strain Closure model. The software automatically determines which model to use based on the Initial Length value included in the Filler Properties data and calculates a suitable Ci value. Specify a value in the Reduced Strain Closure factor text box.

NoteFibers having an initial length longer than 1 mm are generally considered as long fibers.

RSC model with specified Ci

Select this option if you want the solver to calculate the orientation dynamics using the Reduced Strain Closure model, but you want to specify a Ci value. Click Edit settings to display the Fiber Orientation Model Parameters dialog.