Table of contentsNo headers
Select the relevant Abaqus interface file option, depending on the Abaqus license that you have. This will generate an output file(s) that can be read by Abaqus for analysis.
Note In order to generate the *.osp file described below, you must run a Fill+Pack analysis.
The three possible Abaqus interface file options are described below:
- C-MOLD-Abaqus 6.2
/ C-MOLD license holders. The Autodesk Simulation Moldflow Insight
/ Flow solver will produce a *.fem file and *.osp file, which are both ASCII files in the old C-MOLD Format. The extension .osp
must be changed to .lsp
6.2 to read.
- Autodesk Simulation Moldflow Insight - Abaqus 6.2
license holders. The Autodesk Simulation Moldflow Insight
/ Flow solver will produce a *.mab file, which is an ASCII file of the same format as in MPI 2.0.
- Autodesk Simulation Moldflow Insight - Abaqus 6.3
For the Abaqus
6.3 release. The Autodesk Simulation Moldflow Insight
/ Flow solver will produce an *.osp file and the mesh model must be in * .pat file.
(a) If the *.osp file generated by Autodesk Simulation Moldflow Insight contains the ~ character, rename the file to remove that character otherwise Abaqus will not be able to import the file.
(b) Abaqus 6.2 converts the files output by a Autodesk Simulation Moldflow analysis into Abaqus input (*.inp) file, which can be used in Abaqus analyses.