Different results are generated for each analyses performed.
After a successful analysis you will be able to view the results by selecting them in the Study Tasks pane.
An analysis log is generated every time an analysis is performed. It reports on any inputs used, any warnings or errors encountered, and provides a summary of results generated at the end of the filling and packing phases.
The Analysis Check text result is generated for each analysis, and displays a complete list of any warnings or errors that occurred during each analysis in the sequence. A file is written for each analysis in the sequence.
A result summary showing the analysis inputs and the results of each phase of the analysis or analysis sequence is generated for each analysis that is performed.
An Moldflow Criteria file (*.criteria) contains a set of criteria that describe optimum values or ranges for input values and results.
Comparing several different studies of the same part, each with slightly different settings, will help you optimize the design and manufacturing process.
Interface and result files can be identified by their file extension. The following table lists the purpose of each type of file. Files designated temporary can be safely deleted after the completion of an analysis.
You can customize the results list to include only the results that are required for the current task, to minimize the list of results and to save post processing time. A set of default results are created at the end of an analysis or analysis sequence.
Once an analysis finishes, a default set of results are listed for all analyses performed. You can then edit, rename, examine, overlay results, or even create new result plots.
This help topic specifies the results for a Co-injection analysis on a thermoplastic material.
This help topic specifies the results for a Fill analysis or Fill+Pack analysis sequence on a thermoplastic material with fiber or filler content.
This help topic specifies the results generated for analyses that include Fill, Fill+Pack, or Standalone Pack analysis sequences.
This help topic specifies the results for a Gas-assisted Fill+Pack analysis on a thermoplastic material.
This topic lists the results generated for a Gate Location analysis on a thermoplastic material.
This help topic specifies the results for an Injection-compression analysis on a thermoplastic material.
This help topic specifies the results generated for a Microcellular Injection Molding analysis on a thermoplastic material.
This help topic provides an overview of the results generated by a Microchip Encapsulation analysis.
This topic lists the results generated for a Molding Window analysis on a thermoplastic material.
This section lists the types of results you can expect to see for the optimization products.
This help topic specifies the results for a Process Optimization analysis on a thermoplastic material.
There are results available for a Reaction Injection Molding (RIM) analysis, and a Resin Transfer Molding (RTM) or a Structural Reaction Injection Molding (SRIM) analysis, using a thermoset material.
This topic explains the results generated for a Runner balance analysis on a thermoplastic material.
This help topic specifies the results for a Shrink analysis on a thermoplastic material.
This help topic specifies the results for a Stress analysis on a thermoplastic material.
This help topic provides an overview of the results generated by an Underfill Encapsulation analysis.
This topic specifies the results for a Warp analysis.
This help topic specifies the results for a Birefringence analysis.
Crystallization analysis results are produced when the option to perform crystallization analysis is selected in the analysis process settings.