- 360 Publisher
- Alias
- AutoCAD
- AutoCAD Civil 3D
- AutoCAD Electrical
- AutoCAD for Mac
- AutoCAD LT for Mac
- AutoCAD Map 3D
- BIM 360 Glue
- Building Design Suite
- Constructware
- Creative Finishing
- Design Review
- Factory Design Suite
- Flame Premium
- Green Building Studio
- Infr. Map Server
- Infrastructure Modeler
- Installation Help
- Inventor
- Inventor ETO
- Inventor Fusion
- Inventor Fusion Technology for Mac
- Inventor LT
- Inventor Publisher
- Navisworks
- Navisworks Freedom
- PLM 360
- Product Design Suite
- Project Galileo
- Project Photofly
- Project Simulus
- Revit
- Revit LT
- Robot Structural Analysis Professional
- Sim 360 Pro and Sim 360 Moldflow
- Simulation 360
- Simulation CFD
- Simulation DFM
- Simulation Job Manager
- Simulation Mechanical
- Simulation Moldflow
- Simulation Moldflow Adviser
- Simulation Moldflow Communicator
- Simulation Moldflow Insight
- Simulation Moldflow Insight 360
- Smoke
- Vasari
- Vault
Table of contents
There are results available for a Reaction Injection Molding (RIM) analysis, and a Resin Transfer Molding (RTM) or a Structural Reaction Injection Molding (SRIM) analysis, using a thermoset material.
Graphical results
The following table lists the results generated for a Reaction Injection Molding (RIM) analysis, and RTM or SRIM analysis, and indicates whether each result is supported for the following technologies:
Midplane 
Dual Domain 
3D
| Warp results | Analysis technology |
|---|---|
| Deflection, all effects2 | |
| 1 | For Midplane and Dual Domain analysis technologies, these results are produced only when you have selected an analysis sequence that includes the Incompressible solver. |
| 2 | For Midplane and Dual Domain analysis technologies, these results are produced only when you have selected an analysis sequence that includes the Compressible solver. |
| 3 | This result is available only when the option to Perform venting analysis is selected in the solver parameters. |
| 4 | The Mat orientation result is specific to the RTM and SRIM processes. The RTM and SRIM processes are not supported by 3D analysis technology. |
| 5 | If you select a material with fiber or filler content, Fiber orientation analysis results also will be generated for a Fill+Pack analysis sequence. The option to perform is enabled by default in the Process Settings Wizard. |
Topics in this section
- Bulk conversion result
The Bulk conversion result shows the average material conversion (cure) across the part thickness, calculated over the entire molding process (filling + curing phases).
- Bulk conversion at end of process result
The Bulk conversion at end of process result is generated from a Midplane and Dual Domain Reactive Molding analysis, and shows the average material conversion (cure) across the part thickness, calculated at the end of the filling phase.
- Conversion at node result
The Conversion at node result shows the actual material conversion (cure) at a node, calculated over the entire molding process (filling + curing phases).
- Conversion result
The Conversion result shows the conversion value (degree of cure) at a particular part thickness over the duration of the entire molding process. This part thickness is the normalized thickness.
- Cured layer fraction result
The Cured layer fraction result shows the fraction of thickness where the degree of cure is higher than the gelation conversion.
- Mat orientation result
The Mat orientation result shows the effect of the fiber-mat preform (fiber-mat) properties on the advancement of the melt-front.
- Reactive Molding analysis log
The Analysis Log is a text report that lists the inputs that you used for the Reactive Molding analysis, including solver parameters, material data, process settings an model details, followed by the analysis progress tables.