Results

Topics in this section

• Results (Procedure)

  After a successful analysis you will be able to view the results by selecting them in the Study Tasks pane.

• Analysis log

  An analysis log is generated every time an analysis is performed. It reports on any inputs used, any warnings or errors encountered, and provides a summary of results generated at the end of the filling and packing phases.

• Results files
• Criteria files

  An Moldflow Criteria file (*.criteria) contains a set of criteria that describe optimum values or ranges for input values and results.

• Valid comparisons

  Comparing several different studies of the same part, each with slightly different settings, will help you optimize the design and manufacturing process.

• File extensions

  Interface and result files can be identified by their file extension. The following table lists the purpose of each type of file. Files designated temporary can be safely deleted after the completion of an analysis.

• Customize results

  You can customize the results list to include only the results that are required for the current task, to minimize the list of results and to save post processing time. A set of default results are created at the end of an analysis or analysis sequence.

• Object Missing
• Result plots

  Once an analysis finishes, a default set of results are listed for all analyses performed. You can then edit, rename, examine, overlay results, or even create new result plots.

• Co-injection analysis results

  This help topic specifies the results for a Co-injection analysis on a thermoplastic material.

• Object Missing
• Fiber Orientation analysis results

  This help topic specifies the results for a Fill analysis or Fill+Pack analysis sequence on a thermoplastic material with fiber or filler content.

• Flow results

  This help topic specifies the results generated for analyses that include Fill, Fill+Pack, or Standalone Pack analysis sequences.

• Gas-assisted Fill+Pack analysis results

  This help topic specifies the results for a Gas-assisted Fill+Pack analysis on a thermoplastic material.

• Gate Location analysis results

  This topic lists the results generated for a Gate Location analysis on a thermoplastic material.

• Injection-compression analysis results

  This help topic specifies the results for an Injection-compression analysis on a thermoplastic material.

• Microcellular Injection Molding analysis results

  This help topic specifies the results generated for a Microcellular Injection Molding analysis on a thermoplastic material.

• Microchip Encapsulation analysis results

  This help topic provides an overview of the results generated by a Microchip Encapsulation analysis.

• Molding Window analysis results

  This topic lists the results generated for a Molding Window analysis on a thermoplastic material.

• Optimization product results

  This section lists the types of results you can expect to see for the optimization products.

• Process Optimization analysis results

  This help topic specifies the results for a Process Optimization analysis on a thermoplastic material.

• Reactive Molding analysis results

  There are results available for a Reaction Injection Molding (RIM) analysis, and a Resin Transfer Molding (RTM) or a Structural Reaction Injection Molding (SRIM) analysis, using a thermoset material.

• Runner Balance analysis results

  This topic explains the results generated for a Runner balance analysis on a thermoplastic material.

• Shrink analysis results

  This help topic specifies the results for a Shrink analysis on a thermoplastic material.

• Stress analysis results

  This help topic specifies the results for a Stress analysis on a thermoplastic material.

• Underfill Encapsulation analysis results

  This help topic provides an overview of the results generated by an Underfill Encapsulation analysis.

• Warp analysis results

  This topic specifies the results for a Warp analysis.

• Birefringence analysis results

  This help topic specifies the results for a Birefringence analysis.

• Crystallization analysis results

  Crystallization analysis results are produced when the option to perform crystallization analysis is selected in the analysis process settings.