- 360 Publisher
- Alias
- AutoCAD
- AutoCAD Civil 3D
- AutoCAD Electrical
- AutoCAD for Mac
- AutoCAD LT for Mac
- AutoCAD Map 3D
- BIM 360 Glue
- Building Design Suite
- Constructware
- Creative Finishing
- Design Review
- Factory Design Suite
- Flame Premium
- Green Building Studio
- Infr. Map Server
- Infrastructure Modeler
- Installation Help
- Inventor
- Inventor ETO
- Inventor Fusion
- Inventor Fusion Technology for Mac
- Inventor LT
- Inventor Publisher
- Navisworks
- Navisworks Freedom
- PLM 360
- Product Design Suite
- Project Galileo
- Project Photofly
- Project Simulus
- Revit
- Revit LT
- Robot Structural Analysis Professional
- Sim 360 Pro and Sim 360 Moldflow
- Simulation 360
- Simulation CFD
- Simulation DFM
- Simulation Job Manager
- Simulation Mechanical
- Simulation Moldflow
- Simulation Moldflow Adviser
- Simulation Moldflow Communicator
- Simulation Moldflow Insight
- Simulation Moldflow Insight 360
- Smoke
- Vasari
- Vault
Table of contents
Graphical results
The following table lists the graphical text results generated by using a material with fiber or filler content in a Fill analysis or Fill+Pack analysis sequence, and indicates whether each result is supported for the following analysis technologies:
Midplane 
Dual Domain 
3D
For more information about a result, including how to interpret the display, click on the result name.
Topics in this section
- Average fiber orientation result
The Average fiber orientation result is generated by a Fill or Fill+Pack analysis using Midplane or Dual Domain analysis technology, when the option to perform Fiber orientation analysis if fiber material is enabled.
- Fiber orientation tensor result
The Fiber orientation tensor result shows the orientation tensor (degree of orientation) at the end of the injection molding process.
- Linear thermal expansion coefficient results
The Linear thermal expansion coefficient result indicate any shrinkage that has occurred in relation to temperature changes.
- Poisson’s ratio (fiber) result
The Poisson’s ratio (fiber) result is a fiber-over-thickness (FOT) averaged value, therefore, it is an element-based value averaged over all the laminates of each element.
- Poisson’s ratio (v12) result
The Poisson’s ratio (v12) result indicates the strain in the second principal direction caused by the stress in the first principal direction.
- Poisson’s ratio (v13) (3D fiber) result
The Poisson’s ratio (v13) result is generated from a Fiber orientation Pack analysis using 3D analysis technology.
- Poisson’s ratio (v23) (3D fiber) result
The Poisson’s ratio (v23) result indicates the strain in the third principal direction caused by the stress in the second principal direction.
- Shear modulus (fiber) result
The Shear modulus, sometimes called the rigidity modulus, refers to the change produced by a tangential stress, and provides a measure of how stiff the material is.
- Shear modulus (G12) result
The Shear modulus (G12) result shows the shear strain applied in the XY direction, coinciding with the fiber orientation direction.
- Shear modulus (G13) (3D fiber) result
The shear modulus, sometimes called the rigidity modulus, refers to the change produced by a tangential stress, and provides a measure of how stiff the material is.
- Shear modulus (G23) (3D fiber) result
The Shear modulus (G23) result indicates the shear strain applied in the YZ direction (second and third principal directions).
- Tensile modulus, principal direction results
The Tensile modulus, principle direction results indicate how much stress is needed to cause a unit of movement.
- Fiber length averaged by number result
The Fiber length averaged by number result is generated by a Fill or Fill+Pack analysis, when the option to perform Fiber orientation analysis if fiber material is enabled, the option to Calculate fiber breakage is enabled, and the selected molding material is a long-fiber composite material.
- Fiber length averaged by weight result
The Fiber length averaged by weight result is generated by a Fill or Fill+Pack analysis, when the option to perform Fiber orientation analysis if fiber material is enabled, the option to Calculate fiber breakage is enabled, and the selected molding material is a long-fiber composite material.
- Fiber length probability distribution result
The Fiber length probability distribution result is generated at specified nodes by a Fill or Fill+Pack analysis, when the option to perform Fiber orientation analysis if fiber material is enabled, the selected molding material is a long-fiber composite material, and the option to Calculate fiber breakage is enabled.