How to add your knowledge
Injection-compression analysis results
Text based results The following table lists the text results generated for an Injection-compression analysis. Graphical results The following table lists the graphical results that are generated for an Injection-compression analysis, and indicates whether each result is supported for the following analysis technologies: Midplane For more information about a result, including how to interpret the display, click on the result name. Note Fill+Pack results will always be generated, however, Cool, Warp, Stress and Fiber results will be generated depending on the analysis sequence set and material selected. Topics in this section Cavity volume result
The Cavity Volume:XY plot shows the change in volume between the moving and fixed halves of the mold.
Press force:XY Plot result
The Press force:XY Plot result shows the force applied by the press over the duration of the analysis, displayed on an XY plot of force versus process time.
Press displacement:XY Plot result
The Press displacement:XY Plot result shows the distance the press moved, measured from the reference (initial) location, to the final location at the end of the compression phase, when the mold-cavity space has been reduced (compressed), displayed on an XY plot of distance versus process time.
Press speed:XY Plot result
The Press speed:XY Plot result shows the speed that the press moved at over the duration of the analysis, displayed on an XY plot of speed versus process time.
Message will close by itself in
seconds Message timer has been stopped