At the beginning of a Warp analysis, the analysed part is automatically constrained to a plane where part deflection is measured from. This plane is defined as the original anchor plane.
You can define your own anchor planes using Warpage Visualization Tools. To access all existing anchor planes go to , then in the Warpage Visualization Tools dialog, click .
Note The command does not actually delete the anchor planes and you can still access all defined anchor planes by clicking in the Warpage Visualization Tools dialog.
- Make sure you have a deflection (warpage) result displayed and an anchor plane created.
- Click .
You can drag the anchor plane nodes about the part to update the anchor plane in the warpage result display. You can also increase or decrease the size of the anchor icons (
) by pressing and holding down the key while dragging your mouse cursor either towards you or away from you.