Product help with community knowledge
2013
Simulation Moldflow
HomeSimulation MoldflowEnglish2013HelpAdviserModelingCreate Sprue dialog

Community Scoring

Was this page helpful?

Tag Tags0

This page has no tags

Page statistics

773 views,  2 edit(s),  2950 characters(s) Page last modified 07:59, 5 Jun 2012 by contentconnector
How to add your knowledge

Create Sprue dialog

    Table of contents
    No headers

    Set the drop point coordinates, the sprue properties, and location on the grid.

    To access this dialog, click Geometry tab File:Simulation_Moldflow/enu/2013/Help/Adviser/0572-Modeling572/1121-Create_S1121/ac.menuaro.gif Feed System panel File:Simulation_Moldflow/enu/2013/Help/Adviser/0572-Modeling572/1121-Create_S1121/ac.menuaro.gif Sprue.

    NoteThe Runner tools are not available for a Part Only mold type.

    The drop point (sprue location) is the place for the melted plastic to enter the mold.

    You can select the drop point by clicking on the display and entering distances in the X and Y boxes, or by clicking the Middle of the mold button.

    The Sprue properties group allows you to set the default length, size and shape of the sprue to be modeled for your part.

    Note If you use this tool to change the sprue properties before you create the sprue, it will have the new properties. The properties of an existing sprue will not change unless you select the sprue, right-click on it, select Properties and change the sprue properties in the dialog that appears.

    Comments0

    Attach Files

    Files1

    FileSizeDateAttached by 
    ac.menuaro.gif
    No description
    		63 bytes07:59, 5 Jun 2012contentconnectorActions
    Powered by MindTouch
    © Copyright 2013 Autodesk, Inc. All rights reserved.   Privacy Policy — Legal Notices & Trademarks