Results Summary

Summary

All of the inputs that have been specified for the analysis are listed in the General tab of the Summary pane, and this section is used to verify that the inputs are correct. This summary contains the following information, depending on the analysis that is being run:

• Solver parameters
• Material data
• Process settings
• Model details

The Mold tab records the following information:

• Mold dimensions
• Mold material
• Mold plate dimensions
• Mold offsets

The Runner System tab records the following information:

• Sprue dimensions
• Runner dimensions
• Gate dimensions

The Cooling System tab records the following information:

• Cooling circuit dimensions
• Coolant information

The Fill tab records the following results:

• Actual filling time
• Actual Injection pressure
• Clamp force area
• Max. clamp force during filling
• Velocity/pressure switch-over at % volume
• Velocity/pressure switch-over at time
• Estimated cycle time
• Total part weight at the end of filling
• Shot volume
• Cavity volume
• Runner system volume

The Pack tab records the following results:

• Maximum clamp force during cycle
• Max. wall shear stress
• Total part weight
• Cooling time
• Cycle time

The Cooling Quality tab records the following results:

• Maximum and minimum temperature variance
• Maximum and minimum cooling time variance

The Cool tab records the following results:

• Maximum temperature, part
• Minimum temperature, part
• Average temperature, part
• Mold exterior temperature

The Cost Adviser displays the following results:

• Total cost
• Total cost per shot
• Material cost
• Mold cost
• Molding cost
• Post-molding cost
• Cost breakdown