How to add your knowledge
Solver message 99323
** ERROR 99323 ** The thermal conductivity of the selected material is less than or equal to zero. Typical value: 0.1 W/m-C. Check the material data and run the analysis again.
The polymer thermal conductivity is outside the expected range.
- Edit the current material and change the thermal conductivity. Typical thermal conductivity values are around 0.1 W/m-C.
- Select a different material.
- If the material is from the Autodesk Simulation Moldflow materials database, contact Technical Support.
Message will close by itself in seconds
Message timer has been stopped