Solver message 99465

Message text

** ERROR 99465 ** The composite elastic modulus in the first principal direction (E1) ( elastic modulus value1 ) is lower than the composite elastic modulus in the second principal direction (E2) ( elastic modulus value2 ). Check the material data and run the analysis again.

Explanation

The composite (matrix+fibers) Elastic modulus, 1st principal direction (E1) value that is specified in the mechanical properties of the currently selected material is less than the Elastic modulus, 2nd principal direction (E2) value, which is not feasible.

Resolution

• Edit the current material and change the composite elastic moduli.
• Select a different material.
• If the material is from the Autodesk Simulation Moldflow materials database, contact Technical Support.