Solver message 99460

Message text

** WARNING 99460 ** The composite elastic modulus in the first principal direction (E1) value ( composite E1 value ) is higher than the fully aligned E1 value ( fully aligned E1 value ). Check the material data and run the analysis again.

Explanation

The fiber orientation prediction code has calculated the theoretical maximum value for the elastic modulus in 1st principal direction (E1) value, if all fibers are aligned with the flow direction (<fully_aligned_E1_value>), using the micro-mechanics model selected in the solver parameters. The composite (matrix+fibers) Elastic modulus, 1st principal direction (E1) value specified in the mechanical properties of the currently selected material is greater than this theoretical maximum value, which suggests the composite value is invalid.

Resolution

• Edit the current material and change the composite elastic modulus.
• Select a different material.
• If the material is from the Autodesk Simulation Moldflow materials database, contact Technical Support.