Product help with community knowledge
2013
Simulation Moldflow
HomeSimulation MoldflowEnglish2013HelpCommunicatorResultsObject MissingTemperature, mold-circuit interface (transient) result

Simulation Moldflow

2012
2013
Help
Installation and Licensing
Insight
Insight 360
Adviser
Communicator
Autodesk Simulation Moldflow Communicator Help
Visual Learning
Introduction to Autodesk Simulation Moldflow Communicator
Release notes
Tutorial
Getting started
User Interface
Modeling
Molding processes
Analysis sequence
Materials and databases
Process settings
Results
Results (Procedure)
Results
Analysis log
Plot properties
Results Summary
Co-injection analysis results
Object Missing
Average temperature, cold runner result
Average temperature, part result
Circuit coolant temperature result
Circuit flow rate result
Circuit metal temperature result
Circuit Reynolds number result
Cool analysis log
Circuit heat flux
Circuit heat removal efficiency result
Circuit pressure result
Criteria for assessing cooling performance
Flow front temperature, mold-cavity result
Flux, part (top) result
Flux, part (bottom) result
Flux, part result
Frozen layer percentage, part (bottom) result
Frozen layer percentage, part (top) result
Maximum temperature position, part result
Mold-melt temperature difference (bottom), part result
Mold-melt temperature difference (top), part result
Mold-melt temperature difference result
Mold parting surface result
Percentage frozen layer, cold runner result
Percentage frozen layer result
Percentage molten layer result
Rapid heating and cooling circuit density result
Rapid heating and cooling circuit flow rate result
Rapid heating and cooling circuit pressure result
Rapid heating and cooling circuit Reynolds number result
Steam condensate mass result
Steam quality result
Temperature at surface, cold runner result
Temperature at surface, hot runner result
Temperature, circuit coolant (averaged) result
Temperature, circuit coolant (transient from start-up) result
Temperature, circuit coolant (transient) result
Temperature, core (averaged) result
Temperature, core (transient from start-up) result
Temperature, core (transient) result
Temperature difference, insert result
Temperature difference, part result
Temperature difference, parting plane result
Temperature, insert (bottom) result
Temperature, internal mold result
Temperature, parting plane (bottom) result
Temperature, insert (top) result
Temperature, maximum, cold runner
Temperature, maximum, part result
Temperature, mold boundary result
Temperature, mold (averaged) result
Temperature, mold (transient from start-up) result
Temperature, mold (transient) result
Temperature, mold-cavity interface (averaged) result
Temperature, mold-cavity interface (transient from start-up) result
Temperature, mold-cavity interface (transient) result
Temperature, mold-circuit interface (averaged) result
Temperature, mold-circuit interface (transient from start-up) result
Temperature, mold-circuit interface (transient) result
Temperature, mold-circuit interface (transient from start-up) result
Temperature, mold insert (averaged) result
Temperature, mold insert (transient from start-up) result
Temperature, mold insert (transient) result
Temperature, mold-insert difference (averaged) result
Temperature, mold-insert difference (transient from start-up) result
Temperature, mold-insert difference (transient) result
Temperature, mold-mold difference (averaged) result
Temperature, mold-mold difference (transient from start-up) result
Temperature, mold-mold difference (transient) result
Temperature, mold (top) result
Temperature, mold (bottom) result
Temperature, mold result
Temperature, mold (transient) result
Temperature, parting plane (top) result
Temperature, part (averaged) result
Temperature, part (transient from start-up) result
Temperature, part (transient) result
Temperature, part insert (averaged) result
Temperature, part insert (transient from start-up) result
Temperature, part insert (transient) result
Temperature, part result
Temperature, part (bottom) result
Temperature, part (top) result
Temperature, part insert result
Temperature profile, cold runner result
Temperature profile, hot runner result
Temperature profile, part result
Temperature, rapid heating and cooling thermocouples (transient) result
Temperature, rapid heating and cooling thermocouples (transient from start-up) result
Temperature residual, exterior shell result
Temperature residual, inserts result
Temperature residual, part result
Time to reach ejection temperature, cold runner result
Time to reach ejection temperature, part result
Cooling Quality analysis results
Fiber Orientation analysis results
Fill analysis results
Pack analysis results
Gas-assisted Fill+Pack analysis results
Gate Location analysis results
Design Adviser results
Injection-compression analysis results
Microcellular Injection Molding analysis results
Microchip Encapsulation analysis results
Molding Window analysis results
Optimization product results
Process Optimization analysis results
Reactive Molding analysis results
Runner Balance analysis results
Shrink analysis results
Sink Mark analysis results
Stress analysis results
Underfill Encapsulation analysis results
Warp analysis results
Birefringence analysis results
Reference materials
Troubleshooting guide
Glossary of Terms
Simulation TV
Videos
Community

Community Scoring

Was this page helpful?

Tag Tags0

This page has no tags

Page statistics

806 views,  1 edit(s),  3790 characters(s) Page last modified 00:01, 5 Jun 2012 by contentconnector
How to add your knowledge

Temperature, mold-circuit interface (transient) result

    The Temperature, mold-circuit interface (transient) result shows how the temperature at the interface between the mold and the cooling channels changes over the duration of the cycle.

    Using this result

    Use this result to determine whether the cooling channels are cooling effectively, or whether their placement will affect cycle time and part warpage. If there are hot or cool spots, you may need to adjust the cooling channels, or coolant temperature. Cooling channel placement and the thermal conductivity of the mold will affect the temperature variations.

    The Temperature, mold-circuit interface (transient) result will typically be between 10ºC and 30ºC below the mold-cavity interface (transient) temperature. If an automatic Injection + Packing + Cooling time is used, a coolant temperature too close to the target temperature will significantly extend the predicted cycle time.

    TipYou can create an XY plot of the transient mold-circuit interface temperature, on any given node, to see how the temperature at that node varies with time. Click on Results in the Results pane of the Home tab, then click (New Plot File:Simulation_Moldflow/enu/2013/Help/Communicator/0566-Results566/0584-Object_M584/0642-Temperat642/ac.menuaro.gif Plot) and scroll down to the result. Remember to change the Plot type to XY plot.

    Things to look for

    When viewing the Temperature, mold-circuit interface (transient) result, watch for the following.

    • Localized hot or cold spots.
    • The cooling pattern. Is it evenly distributed?

    Comments0

    Attach Files

    Files1

    FileSizeDateAttached by 
     ac.menuaro.gif
    No description
    		63 bytes00:01, 5 Jun 2012contentconnectorActions
    Powered by MindTouch
    © Copyright 2013 Autodesk, Inc. All rights reserved.   Privacy Policy — Legal Notices & Trademarks