Simulation Moldflow
- 360 Publisher
- Alias
- AutoCAD
- AutoCAD Civil 3D
- AutoCAD Electrical
- AutoCAD for Mac
- AutoCAD LT for Mac
- AutoCAD Map 3D
- BIM 360 Glue
- Building Design Suite
- Constructware
- Creative Finishing
- Design Review
- Factory Design Suite
- Flame Premium
- Green Building Studio
- Infr. Map Server
- Infrastructure Modeler
- Installation Help
- Inventor
- Inventor ETO
- Inventor Fusion
- Inventor Fusion Technology for Mac
- Inventor LT
- Inventor Publisher
- Navisworks
- Navisworks Freedom
- PLM 360
- Product Design Suite
- Project Galileo
- Project Photofly
- Project Simulus
- Revit
- Revit LT
- Robot Structural Analysis Professional
- Sim 360 Pro and Sim 360 Moldflow
- Simulation 360
- Simulation CFD
- Simulation DFM
- Simulation Job Manager
- Simulation Mechanical
- Simulation Moldflow
- Simulation Moldflow Adviser
- Simulation Moldflow Communicator
- Simulation Moldflow Insight
- Simulation Moldflow Insight 360
- Smoke
- Vasari
- Vault
How to add your knowledge
Table of contents
The Quality prediction result is used to estimate the quality of the mechanical properties and appearance of the part. This result is derived from the pressure, temperature, and other results.
The colors displayed in the Quality prediction result indicate the following:
- Will have high quality.
- May have quality problems.
- Will definitely have quality problems.
Quality prediction color code
Note The Quality prediction result will not be available if there is a short shot. Fix the cause of the short shot before analyzing this result.
Things to look for
The quality prediction of this part is displayed on the following sliding scale.
| All green | The part quality should be acceptable. |
| Some yellow | The part quality may not be acceptable. As the percentage of yellow increases, the part quality will decrease. |
| Some yellow and red | The part quality is more likely to be unacceptable. As the percentages of yellow and red increase, the part quality will decrease. |