In this task, you will select the molding process and the analysis sequence, that is, the series of analyses that will be performed.
The Select Analysis Sequence dialog appears.
Notice in the Project View pane that there is a symbol next to the study name. It shows you that you have selected a Fill analysis for that study. When the analysis has been run and results are available, the inside of the symbol is colored in.
When analyzing a part from an imported CAD model, start with a basic filling ("Fill") analysis to check the filling pattern, injection pressure, and the location of air traps or weld lines. Once you are satisfied with the filling parameters for the part, you can run a Fill+Pack analysis (filling and packing phases). Then run further analyses such as cooling or warpage.