The Flame and Flame Premium 2013 20th Anniversary Editions feature a major redesign of the workflow, integrating the powerful visual effects toolset of Flame 2013 with the full set of story-driven editorial tools of Smoke Advanced 2013. The Extension 1 releases also offer a new workflow.
Continue to use your 2013 release (shipped in April 2012) in production, and make the switch to the 20th Anniversary Edition workflow when you are ready. Autodesk highly recommends familiarizing yourself with the new workflow in the 20th Anniversary Edition and/or Extension 1 release prior to use in production.
While it is preferable to install and learn the new software on a separate workstation, Flame Premium 2013 20th Anniversary Edition and Extension 1 software can be installed on the same workstation as the 2013 release. However there are some considerations.
Two important components of the software package are replaced when you install the latest version: Wiretap Gateway and Stone & Wire.
This means that after installing 2013 20th Anniversary Edition/Extension 1, your 2013 version will use those new components with their new functionality, but with the following known issues and limitations.
Volume Integrity Check (VIC) No Longer Runs Automatically
VIC will not run automatically if there is a 2013 20th Anniversary/Extension 1 project on your framestore.
VIC must run daily to prevent data loss.
If you install 2013 20th Anniversary/Extension 1 on the same workstation as your 2013 software, you must run VIC manually to check the integrity of media files used by your projects.
To run VIC manually, type the following command in a shell:
Be sure to read the results from the command in the shell to be sure that VIC ran successfully.
To run VIC, you can also open a project in 2013 20th Anniversary Edition/Extension 1 or reboot your system.
When both 2013 20th Anniversary Edition/Extension 1 and 2013 are installed on the same system, two versions of Wiretap Server are also installed. You must make sure that the version of Wiretap Server running is compatible with your version of the creative application. This is particularly important when working on interop projects that rely on Wiretap Server, such as working on a grading project using both Smoke and Lustre.
To confirm or change versions of Wiretap Server:
The following tables list the hardware platforms supported in this release, including Linux stand-alone workstations, Incinerator workstations and Lustre Media Servers.
| Workstation | BIOS | AJA Firmware | Operating System | DKU |
|---|---|---|---|---|
| HP® Z820 Workstation with NVIDIA® Quadro 6000 graphics card | 1.14 | AJA KONA 3G: 2011/12/02 13:05:45 | Red Hat® Enterprise Linux® Workstation 6.2 (64-bit) | 7.5.0 |
| HP Z800 Workstation with NVIDIA Quadro 6000 graphics card | 3.54 | AJA KONA 3G: 2011/12/02 13:05:45 | Red Hat Enterprise Linux Desktop 5.3 with Workstation Option (64-bit) | 7.5.0 |
| HP Z800 Workstation with NVIDIA Quadro FX5800 | 3.54 | 0x75 AJA OEM 2K | Red Hat Enterprise Linux Desktop 5.3 with Workstation Option (64-bit) | 7.5.0 |
| HP xw8600 | 1.35 | 0x73 | Red Hat Enterprise Linux WS 4, Update 3 (64- bit) | 7.5.0 |
| HP xw9400 | 3.05 | 0x73 | Red Hat Enterprise Linux WS 4, Update 3 (64- bit) | 7.5.0 |
| HP xw 8400 | 2.26 | 0x73 | Red Hat Enterprise Linux WS 4, Update 3 (64- bit) | 7.5.0 |
The following table lists the Lustre Windows workstations supported in this release, as well as the certified BIOS version, NVIDIA graphics card driver version and operating system version for each platform.
| Workstation | BIOS | Graphics Driver | Operating System |
|---|---|---|---|
| HP xw8600 | 1.35 | 186.18 | Microsoft Windows XP SP2 |
| HP xw 8400 | 2.26 | 186.18 | Microsoft Windows XP SP2 |
The following table lists the supported hardware platforms for Incinerator Render Nodes, with the certified BIOS versions and operating system distributions for HP ProLiant Burn Render Nodes.
| Render Node | BIOS | Operating System | DKU |
|---|---|---|---|
| HP ProLiant DL160se G6 | 07/05/2009 | Red Hat Enterprise Linux Desktop 5.3 with Workstation (64-bit) | 7.5.0 |
| HP ProLiant DL160 G5 | 04/09/2008 | Red Hat Enterprise Linux WS 4 Update 3 (64-bit) | 7.5.0 |
| HP ProLiant DL140 G3 | 1.09 | Red Hat Enterprise Linux WS 4 Update 3 (64-bit) | 7.5.0 |
Effects: CPU Burn Limitations:
Limitations with Old Graphics Cards
Keep in mind the following information on software compatibility and limitations before upgrading to the current version.
Autodesk recommends archiving your media and project data before you upgrade.
| Key | Component/s | Summary |
|---|---|---|
| FLPR-7741 | Action | Setups created in Flame 2011.1 are slow to load in 2013 SP3. |
| FLPR-5098 | Action | Application crashes when processing action setup with Slip background and disabled default output. |
| FLPR-5215 | Action | Action: ALT+Click to get rid of the animation on R, resets B and G channels as well. |
| FLPR-5019 | Action | Copy and paste a Colour Correct in Action deactivates destination layer's crop. |
| FLPR-4913 | Action | Objects added to scene appear at wrong position in schematic. |
| FLPR-1375 | Action | Complete Scene naming consistency between Desktop and Batch. |
| FLPR-1181 | Action | Node Bin tabs are missing after exiting and re-entering Action. |
| FLPR-4979 | Action | Crashes when enabling wireframe mode in text and Lens Flare is present on ATI card. |
| FLPR-6874 | Action - FBX | Export FBX camera: The rotation order result is only exported as XYZ. |
| FLPR-1411 | Action - FBX | FBX loses connections and orientation when exported and then re-imported. |
| FLPR-7022 | Action - FBX | ZXY rotation order in FBX import is not properly preserved. |
| FLPR-1452 | Animation Editor | Wrong timewarp applied to a source clip after doing a 4-point edit. |
| SMOK-5009 | Archive / Restore | When archiving the library with Verify Archive Data, errors occur in the process and slates are corrupted. |
| SMOK-2063 | Archive / Restore | Archiving: Pre-archive validation with in-UI reporting. |
| SMOK-4204 | Audio | Audio Output Delay does not work with decimal values. |
| SMOK-2011 | Backburner | Can't send jobs to Backburner Manager on Windows. |
| FLPR-7884 | Batch | When loading the filter setup, the effect value is always at 100%. |
| FLPR-6571 | Batch | Crashes in Batch when using a MUX node as an input to an Action node, with an external layer connected to a paint node, then entering the modular keyer on a 2nd external layer. |
| FLPR-6245 | Batch | Batch: If descriptor's limit is reached, you cannot save batch setups. |
| FLPR-5300 | Batch | Entering and exiting Batch with a Timewarp node that had cache turned off, turns cache back on in the node. |
| FLPR-64 | Batch | Distort: Matte out feeding Front does not work. |
| FLPR-3034 | Batch Schematic | Batch navigator creeps up the screen. |
| FLPR-7000 | Colour Corrector / Colour Warper | Negative clamping clamps the whites as well as the blacks. |
| SMOK-5403 | Conform | Specific XML generates crash, out of memory error. |
| SMOK-3923 | Conform | AAF file from an AMA MP4 import does not provide the MP4 media files path(s). |
| FLPR-1443 | Creative tools | Using clips with different bit-depths for the Front and Matte inputs on the Timewarp node creates corruption. |
| FLPR-909 | Creative tools | Tools tab icons should be disabled while rendering. |
| FLPR-779 | Creative tools | Interlaced stereo clip is inverted L/R eyes on FLAME FX's Stereo |
| FLPR-1447 | Creative tools | If you click a node inside distort, exit to Batch Schematic and try to copy the Distort node with the copy keyboard shortcut, it will copy the schematic node selected inside Distort instead of the actual Distort batch node. |
| FLPR-1211 | Creative tools | Applying smoothing to GMask causes display problems in Batch proxy view. |
| FLPR-2789 | Creative tools | Batch: Directional Blur bias value not saved. |
| FLPR-778 | Creative tools | AutoStabilize with Tile Repeat fed by Action node might cause black lines in result image. |
| FLPR-5768 | Creative tools | Matchbox: page/tab titles defined in an xml are ignored in the UI. |
| SMOK-9139 | EditDesk & Desktop & Editing tools | Timeline: Cannot select a gap on a layer if it is not defined by a preceding/following clip. |
| SMOK-6316 | EditDesk & Desktop & Editing tools | Crash: Various scenarios that involve editing in the timeline and containers. |
| SMOK-4909 | EditDesk & Desktop & Editing tools | Matched clip doesn't have a name if the original clip was Hard Commit then renamed. |
| SMOK-2322 | EditDesk & Desktop & Editing tools | Timeline: Overwriting with source clip causes video layer shift. |
| SMOK-8828 | Hardware Configuration and OS | Red Hat 6 : Library clip displays the message "pending render" after reboot. |
| SMOK-8199 | Hardware Configuration and OS | On rhel6.2 kickstart should configure automount to use /hosts. |
| SMOK-6988 | Hardware Configuration and OS | Red Hat 6.2: Stereo Capture not accurate and frames might be dropped. |
| SMOK-8202 | Hardware Configuration and OS | X server crashes if user logs out with Intous5 pen in close proximity to the tablet. |
| SMOK-8198 | Hardware Configuration and OS | Graphics are severely corrupted and the display un-readable when Z820 is shut down. |
| SMOK-8197 | Hardware Configuration and OS | In rhel6.2 the KDE task bar displays when the mouse is at the edge of the screen over the task bar area. |
| SMOK-5226 | Hardware Configuration and OS | '' DLvideo error , NO video list '' message should be more precise when troubleshooting video hardware or Driver setup. |
| SMOK-6702 | Hardware Configuration and OS | dlConfigCheck reports wrong DVS HD firmware version on HP8400. |
| SMOK-8509 | Installation & Software Config | In Xorg.conf provided by Autodesk, graphic cards are defined as Quaddro, should be Quadro. |
| SMOK-1732 | Installation & Software Config | CER 9428491 : Crash on start-up when launching the application with unsupported hardware. |
| FLPR-5042 | Keyers | Crashes on exit after using modular keyer to add a Paint Node. |
| FLPR-791 | Keyers | Modular Keyer: Bad refresh on Matte with GMask on MBlend input2 in Context view. |
| SMOK-5048 | Network | Wiretap servers cannot start if MulticastPort is different from default value. |
| SMOK-1734 | Project Management: Project | Network configuration problem leads to crash. |
| SMOK-2386 | Read File Node | ProRes Wiretap Gateway imports do not work with big endian audio. |
| SMOK-399 | Read File Node | Variable framerate QuickTime clips missing frames on import. |
| SMOK-7581 | Sparks | Batch assert if a spark call sparkError while processing. |
| FLPR-7828 | Text | Certain .otf fonts are only partially loaded in the application (limited to number characters). |
| FLPR-769 | Warper / Distort | Distort: Link Src & Dest does not work when more than 1 point is selected. |
| SMOK-8670 | Wire | Corruption on clips being wired over InfiniBand. |
| SMOK-7503 | Wiretap | python API client library not updated for python 2.6 |
| SMOK-7356 | Wiretap Gateway | Filenames with commas do not import/scan via wiretap gateway. |
| SMOK-2970 | Wiretap Gateway | AVCHD import with Store Local Copy results in skipping frames. |
| SMOK-1747 | Wiretap Gateway | Playback issue with 25p and 50p MTS file. |
| SMOK-4758 | Wiretap Gateway | Gateway times out on specific file. |
| SMOK-5931 | Wiretap Gateway | QuickTime long GOP clips: performance is slow when using the gateway with stored local copy. |
| Key | Component/s | Summary |
|---|---|---|
| FLPR-8193 | Lustre: Colour Grading | Thumbnail colour updates disappear. |
| FLPR-5164 | Lustre: Colour Grading | Linear Gamma not working as expected in Lustre. |
| FLPR-5503 | Lustre: Hardware Configuration and OS | Lustre won't start if workstation has a Mellanox QDR InfiniBand adapter. |
| FLPR-6561 | Lustre: Legacy Editing | Legacy editing functions do not work with Multi clips. |
| FLPR-243 | Lustre: Legacy Editing | Scene Detect tool does not work just after starting Lustre in a new project. |
| FLPR-5802 | Lustre: Preferences / Project / User & Hotkey management | Project: Lustre crashes when loading a project if it can't access a host while Auto Reparse is enabled. |
| FLPR-6014 | Lustre: Render | One Sequence Render requires using Shit-P to see new renders. |
| FLPR-4159 | Lustre: Render | Render: Generate proxy does not generate proxies for the matte media. |
| FLPR-5795 | Lustre: Timeline | Lustre crashes when loading certain CMX3600 EDLs. |
| FLPR-293 | Lustre: Tools | Error messages: too many error in console when Selector copy from R3D file. |
| Key | Component/s | Summary |
|---|---|---|
| FLPR-8224 | 3D Interop: FBX file format | Crash when rendering an fbx setup with point cache in 16-bit float. |
| FLPR-8027 | Action | 3D text. Mimic link refresh error. Workaround: Copy/Paste the 3D Text once the modifications are done. |
| FLPR-7987 | Action | Crash when scrolling image resolution settings with an Atomize node. |
| FLPR-8221 | Action | FBX: crash when changing a solid to original wireframe on a non-triangle polygon. |
| SMOK-9981 | Archive / Restore | Cannot archive a project that was first restored from an archive which then included multiple workspaces. |
| SMOK-10061 | Archive / Restore | Selecting a Media Library folder and a Desktop/Batch Snapshots folder, or a Shared Folder and a Desktop/Batch Snapshots, and drag and drop to archive = crash. Workaround: Do not use multiple select. |
| SMOK-9787 | Archive / Restore | If the target volume for archive is too small, the archive size estimate fails. |
| SMOK-9817 | AVIO | Input Clip crashes on Play and Log Events if the option "EDL Log On Out" is enabled. |
| FLPR-8053 | Batch | Motion Blur Node: "Trails" blur type does not work. |
| FLPR-8123 | Batch | UI corruption when Paint has front and matte input from Action. Workaround: Click anywhere to refresh. |
| SMOK-9827 | Batch | Read File node: Resize and LUT modifications are not applied to a clip with versions. Workaround: Apply the resize or LUT at the LOAD level or after, using a Resize or LUT Editor batch node. |
| FLPR-8282 | Burn | Batch Render node only send Result to Burn, out matte is missing. Workaround: Use the render node to render each result separately. |
| FLPR-8151 | Colour Management | When Flame Reactor is enabled, the Clip node and the Read Node do not support 3D LUT if the node output is set to 16-but fp. Workaround: Import the footage through the MediaHub with a 3DLUT. |
| FLPR-8283 | Colour Management | Viewer data type (Linear/Video) problem with refresh. Workaround: Change the Viewer data type manually. |
| SMOK-9983 | Conform workflow | Handles are not consolidated when linking sources to XML or AAF sequences. |
| FLPR-8187 | Control Panel | The Tangent Element panel is not initialized the first time you launch Flame after install. Workaround: Relaunch Flame Premium (or launch Lustre first). |
| FLPR-8127 | Creative Tools | Corruption occurs when using Digital Video Damage Type in the Damage effect when Classic Engine is chosen as the Project Rendering Mode. Workaround: For NVidia FX5600 graphics cards and more recent models: Choose Flame Reactor in the Project Rendering Mode box. |
| FLPR-8169 | Creative Tools | Auto-detection in Remove Pulldown gives poor results. Workaround: Use standard remove pulldown instead of the auto-detect. |
| FLPR-8149 | Creative Tools | The Proxy Regeneration tool in the Utilities tab does not work. |
| FLPR-8116 | Creative Tools | Crash entering Resize from the timeline FX with the Broadcast toolbar displayed. Workaround: Enable the Viewport Monitoring option before entering the Resize Effect. |
| SMOK-10042 | Data Management | AUTO_BACKUP folder keeps the deleted folders, and this can fill up the system disk. |
| SMOK-9945 | Data Management | Scrubbing the thumbnail of a clip in a remote project makes it update slowly, and go black on mouse-up. Workaround: Use the Previewer to scrub the clip. |
| SMOK-8780 | Data Management | Unlink Reloadable is not available. |
| SMOK-5582 | Data Management | Crash when interrupting proxy generation. |
| SMOK-9611 | Desktop & Editing Tools | After using contextual menu to Duplicate clip, the focus is on the original clip. |
| SMOK-9672 | Desktop & Editing Tools | Using Export from the contextual menu on the Sequence viewer or Storyboard record clip exports the last selected clip. Workaround: Always export from the Workspace panel or drag-and-drop in the MediaHub to make sure you export the correct clip. |
| FLPR-8152 | Desktop & Editing Tools | Reels in Reverse mode aren't behaving properly when deleting clip |
| FLPR-7957 | Desktop & Editing Tools | Reels view disappears when double-clicking Batch source to display Player, then switching to Tools tab. Workaround: Use the Layout box to switch back to Desktop Reels (or Thumbnails) view. |
| SMOK-9784 | Desktop & Editing Tools | Contextual-menu Export won't work on the Sequence Viewer if the displayed sequence is not in the folder currently viewed. Workaround: View the folder where the sequence is actually located, and then use the contextual menu to export from there. |
| FLPR-8098 | Interop Lustre Smoke | Interoperability: Burn can't render to Wiretap if the folder name has spaces. Workaround: Do not insert spaces on the folders in your project. |
| FLPR-8235 | Interop Lustre Smoke | Interop: Can't access the snapshots with the Wiretap server. Workaround: Manually restore the snapshot into an active Reel or Desktop folder. |
| SMOK-9783 | Media Export/Import | Importing or exporting with Colour Transforms containing offsets with different in/out bit depths gives incorrect result. |
| SMOK-9720 | Media Export | Sequence Publish: filename is wrong if the filename pattern field contains <name> and Use Timecode is enabled. |
| SMOK-9589 | Media Export | Export of a sequence aborts if it contains an empty audio track. Workaround: Delete the empty audio tracks. |
| SMOK-9430 | Media Export | Export fails if there are muted effects in the timeline. Workaround: Delete muted effects. |
| SMOK-7193 | Media Import | R3D decoding performance issues on a system with a Red Rocket |
| SMOK-6740 | Media Import | Scrubbing H.264 or long GOP material makes the application sluggish. Workaround: Set Cache source media to ON when importing H264 or long opt material. Wait for cache jobs to finish. |
| SMOK-10032 | Media Import | YUV Headroom issues when using QuickTime MPEG4 codec. Workaround: Always use the include headroom option for mpeg4 QuickTimes. This will give the proper result for legal-range clips. For full-range clips, highlights will still be clamped. |
| SMOK-9967 | Media Import | Using High Dynamic Range option on a non-HDR R3D clip corrupts the clip; it also crashes anyone browsing the clip from a remote project. Workaround: In MediaHub > Files, set Format Specific Options > R3D > Colour > HDR Settings to anything but "High Dynamic Range". |
| SMOK-9865 | Media Import | The Edit Pre-Processing button is not always visible. Workaround: In the TimelineFX pipeline, click the clip's thumbnail to display the Edit Pre-Processing button. |
| SMOK-9587 | Media Import | "Operation timed out" caused by certain MXF files found in the browsed folder. |
| SMOK-9531 | Media Import | Audio tracks are offset in a QuickTime import. |
| SMOK-9530 | Media Import | Apply YUV Headroom option truncates the headroom from FULL ProRes clips. |
| SMOK-8919 | Media Import | MediaHub > Projects: Multiple selection is not available in thumbnail and list views. Workspace: Use Workspace view. |
| SMOK-9828 | Media Import | Read File node & Edit Pre-Processing in Timeline for R3D clips: the resize crop is up/down inverted. Workaround: Crop the source while looking at the result. or Apply a Flip isolate the element, and then remove the Flip. |
| SMOK-9984 | Media Management: Workspace | MediaHub > Projects: Crash when trying to open the Desktop of a Smoke project. |
| SMOK-9993 | Media Management: Workspace | Unable to delete a project if there is a dead lock on a workspace. Workaround: Delete the 'workspace.xml-lock' files found in /usr/discreet/clip/stonefs<X>/<project>/<workspace>/. |
| SMOK-9977 | Media Panel | Flame loads wrong workspace when you open a project that has multiple workspaces from Project and User Settings. Workaround: To switch project, quit and relaunch Flame to open the project from the Flame start screen. |
| SMOK-9951 | Media Panel | Should not be able to render clips into a Shared Folder without Write Access. |
| SMOK-9845 | Media Panel | Write Access is not released when quitting a workspace. |
| SMOK-9673 | Media Panel | Crash editing project after render. |
| SMOK-9419 | Media Panel | Shared Folders: Cannot drag-and-drop or Import to top level of Shared Folders. Workaround: Create the sub-folder manually and copy in the contents. |
| SMOK-9946 | MediaHub - Project | Crashes when browsing a remote project and using the Previewer's full-screen mode. |
| SMOK-9852 | MediaHub - Project | Applying a LUT before loading a project from the MediaHub causes a crash. |
| FLPR-8071 | Paint & Batch Paint | Crash drawing in proxy view after disabling bypass. |
| SMOK-8983 | Player | Timeline with H.264 (long GoP) material results in GFX drops during playback. Workaround: Set Cache source media to ON when importing. Wait for cache jobs to finish. |
| SMOK-9851 | Preferences / Project / User & Hotkey management | Some Resolution Templates show discrepancies in the Project Creation dialog box. Workaround: Set the resolution manually at 1920 by 1035 using the width and height sliders. |
| SMOK-9620 | Sparks | Colours are incorrect when loading a setup from a previous release from Sapphire Sparks 4. Workaround: Recreate the effect using Sapphire Sparks 4 in this version. |
| FLPR-8109 | Timeline | Crash exiting when in a Colour Corrector timeline FX and when a Delete/Cut/Load event is in the undo buffer. |
| FLPR-8054 | Timeline FX | Gesturally moving an image when in the Axis menu adds a keyframe even if Autokey is off. Workaround: Toggle AutoKey On/Off in the editor. |
| FLPR-8069 | Views & Multiviews | You may notice a delay when using the Viewport Layout box to change the viewport layout. Workaround: Use the Keyboard Shortcuts to change the viewport layout. |
| FLPR-8067 | Views & Multiviews | Axes or vertices may jump when the broadcast monitor focus is on Action Schematic in a multiview layout. Workaround: Set the monitor on any other view than the Action Schematic. |
| SMOK-9961 | Wire | A Mac-Gateway ProRes clip imported on a Linux workstation and wired to another Linux results in the corruption of the wired clip. |
| SMOK-9930 | Wire | Second Wire transfer of the same clip results in a checkerboard clip. |
| SMOK-9887 | Wire | Wire: Use Remote/Use Local Machine option for background wire does not work as expected. |
| SMOK-9870 | Wire | Crash when scrubbing media in the Previewer of the MediaHub > Projects, after first loading a project. |
| SMOK-9860 | Wire | In MediaHub > Projects, the message "Workspace is out of date..." appears even if the Workspace has not been modified. Workaround: Restart navigation to the workspace, and from the top of the MediaHub > Projects hierarchy, click refresh. |
| SMOK-9661 | Wire | No UI update when exporting a Batch Snapshot through MediaHub>Projects. Workaround: To update the content of the Batch Snapshot folder after exporting the Batch Snapshot, click Home and then select Gear Menu > Refresh. Navigate back to the folder to display its updated content. |
| SMOK-9590 | Wire | In MediaHub > Projects, the Export button disappears after a Wire. Workaround: Click in the Projects area to bring back the Export button. |
| SMOK-9503 | Wire | MediaHub > Projects: .files appear in the browser when they should not. |
| SMOK-9352 | Wire | MediaHub > Projects: Crash when scrubbing an expanded clip from a remote project. |
| SMOK-9986 | Wire | MediaHub > Projects: Background wire is not initialized properly, as after Install, 1st session is done in foreground. Workaround: Disable and then enable MediaHub > Projects > Background Wire. |
| SMOK-9955 | Wire | MediaHub > Projects: Newly created Shared Folders do not appear after a Refresh. Workaround: Go up one level in the folder hierarchy, and then go back into the project. |
| SMOK-9432 | Wiretap | 2013.1 Wiretap Server does not support libraries from previous releases. As a result 2013 release cannot do a Cleaner Export anymore and WiretapCentral does not see 2013 clips. Workaround: Make sure you are running the corresponding Wiretap server with the version of the application you are working with. To revert to the previous version of the Wiretap server: In a shell or terminal : Go to /usr/discreet/<application_version>/bin. As root, run ./selectWiretapVersion.py (it will tell you which version is currently running). Type the number next to the version you wish to run The selected Wiretap server will be activated. If you want to go back to the other Wiretap server version, repeat these steps. If Wiretap server fails to start you can use this command : /usr/discreet/sw/sw_restart This will restart Stone & Wire and Wiretap services. |
| SMOK-9293 | Wiretap | Wiretap Central & Lustre can't browse the 2013SP3 projects after installing 2013.1 over 2013SP3. |
| Key | Component/s | Summary |
|---|---|---|
| FLPR-8018 | Lustre: Colour Management | Transcoding Float RGB gives wrong result with Colour Transform. |